Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Small rectangular development board with 1.14 inch IPS LCD screen four buttons RGB LED and pre-soldered female headers

Pimoroni

Pimoroni PIM543 Pico Display Pack 1.14" IPS LCD 240x135 development board

SKU CH-GGHD-TB88F

A 1.14 inch IPS LCD with 240 by 135 pixels, four tactile buttons and an RGB LED attaches to a Raspberry Pi Pico via pre-soldered headers for a compact, ready-to-use display interface

  • 14" IPS LCD shows crisp 240x135 visuals
  • Four tactile buttons add instant control
  • RGB LED gives clear status feedback
  • Pre-soldered headers fit Pico without soldering
  • Fully assembled board saves build time

Compact 1.14" Display for Pico

The Pimoroni PIM543 Pico Display Pack adds a 1.14 inch IPS LCD to a Raspberry Pi Pico or Pico W. The screen shows 240 by 135 pixels and comes with four tactile buttons plus an RGB LED. Female headers are pre-soldered so the board plugs straight onto a Pico that already has header pins fitted. No soldering is required and the unit is fully assembled out of the box.

Makers needing a tiny colour interface

This pack suits builders who want a ready-made display and input controls for sensor dashboards, miniature menus or pocket-sized games. Developers who need a larger viewing area, a different resolution or a touch interface should look at alternative screens because this board is fixed at 1.14 inches and 240 by 135 pixels with button-only input.

1.14 inch 240x135 IPS LCD panel

The single specification that decides fit is the 1.14 inch IPS LCD running at 240 by 135 pixels. It determines the physical space the pack occupies, the amount of information you can show and the level of detail available for graphics or text. Match that resolution and size to your enclosure and UI design before purchasing.

I korthet

  • 14" IPS LCD shows crisp 240x135 visuals
  • Four tactile buttons add instant control
  • RGB LED gives clear status feedback
  • Pre-soldered headers fit Pico without soldering
  • Fully assembled board saves build time

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

How do I attach the PIM543 Pico Display Pack to my Raspberry Pi Pico?

Align the pre-soldered female headers on the pack with the male header pins on your Pico and press firmly until fully seated; the 53 mm by 25 mm board sits flush with no soldering needed.

What upkeep does the 1.14 inch IPS LCD and its four tactile buttons require over time?

The display and buttons are solid-state with no moving backlight or mechanical switches to wear out; occasional gentle cleaning of the screen surface is the only routine care.

What is the first limitation I will hit when running graphics continuously on the 240 by 135 pixel screen?

The Pico's own memory and SPI throughput limit how fast you can refresh the full 240 by 135 buffer, so sustained high-frame-rate animation will bottleneck there first.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.