Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Brass dual male G1/4 coupler, toxic candy finish, 20 mm overall height

PrimoChill

PrimoChill Dual Male G1/4 Straight Coupler SX Toxic Candy diy cooling

SKU CH-PJB3-HQZ1S

Brass G1/4 straight coupler with 20 mm threaded height and SX Toxic Candy finish

  • TypeFittings

Option Toxic Candy

Visa 9 fler konfigurationer

Genomstrukna varianter finns, men är inte i lager här.

  • Adapts female ports to male threads via G1/4 standard
  • SX finish resists corrosion and matches Toxic Candy builds
  • Brass construction handles coolant pressure without deformation
  • Compact 10 mm body fits tight tubing runs
  • 20 mm total height clears low-profile component layouts

Dual Male G1/4 Coupler

The PrimoChill Dual Male G1/4 Straight Coupler adapts a female G1/4 fitting to a male G1/4 fitting. It suits DIY liquid-cooling builders who need to connect two female-threaded components directly. The brass body uses an SX high-quality colour finish in Toxic Candy. It is a simple thread converter for custom loops.

Capacity and headroom

The coupler adds 10 mm of height without threads and 20 mm with threads engaged. It handles standard G1/4 thread pressure and flow rates for typical custom cooling loops. Builders needing a different thread pitch or a rotating joint will find this fixed straight coupler unsuitable.

Bundled accessories

The package contains one Dual Male G1/4 Extension Coupler. No seals, tools or additional adapters are included. The single coupler completes the gender change between two female fittings. Extra couplers must be purchased separately for multiple connection points.

I korthet

  • Adapts female ports to male threads via G1/4 standard
  • SX finish resists corrosion and matches Toxic Candy builds
  • Brass construction handles coolant pressure without deformation
  • Compact 10 mm body fits tight tubing runs
  • 20 mm total height clears low-profile component layouts

Specifikationer

TypeFittings

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will the 20 mm overall length of this G1/4 coupler leave enough clearance when I connect it to my existing radiator ports?

The coupler measures 20 mm with threads and 10 mm without, so measure your port spacing and subtract those lengths to confirm fit.

How can I verify the SX Toxic Candy finish is intact after I tighten the brass coupler into my loop?

Inspect the coloured surfaces under good light; the SX coating should show an even, glossy candy hue with no brass showing through at the threads.

Does the single Dual Male G1/4 Extension Coupler in the box include sealing washers, or do I need to buy them separately?

Only the coupler itself is supplied; G1/4 sealing washers or O-rings must be purchased separately if your fittings do not already include them.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.