Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Matte black brass G1/4 90-degree rotary elbow fitting with 15mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 15mm Extension Elbow Fitting TX Matte Black

SKU CH-9C0A-GXRER

A G1/4 90° rotary elbow fitting with 15 mm extension and 360° swivel for custom liquid-cooling loops

  • TypeFittings
  • 360° rotary lets you aim any direction without stressing tubing
  • 90° elbow redirects flow instantly around tight component layouts
  • 15 mm extension adds clearance for crowded motherboard zones
  • G1/4 brass threads seal securely in standard liquid-cooling loops
  • 7 mm total height keeps profile low inside compact cases

G1/4 Rotary Extension Elbow

The PrimoChill G1/4 90° rotary extension elbow fitting connects male and female G1/4 threads in a custom water-cooling loop. Its 360-degree rotary base lets the 90-degree elbow point in any direction without stressing tubing. A 15mm installed height adds clearance around tight components. The brass body carries a TX matte black SX powder-coated finish.

Builders needing adjustable 90-degree routing

This fitting suits builders who must turn tubing 90 degrees at a block or radiator while aiming the port precisely. The 15mm extension clears nearby obstacles such as VRM heatsinks or motherboard shrouds. Loops that require straight couplers or different-angle adapters cannot use this single elbow. It is also unsuitable for loops using thread sizes other than G1/4.

15mm installed base height

The installed base height measures 15mm, which determines whether the elbow clears adjacent parts in a crowded build. Total height reaches 37.7mm with a 5mm thread depth. Match these dimensions to your available space before purchasing.

I korthet

  • 360° rotary lets you aim any direction without stressing tubing
  • 90° elbow redirects flow instantly around tight component layouts
  • 15 mm extension adds clearance for crowded motherboard zones
  • G1/4 brass threads seal securely in standard liquid-cooling loops
  • 7 mm total height keeps profile low inside compact cases

Specifikationer

TypeFittings

Frågor om den här produkten

Does the 360-degree rotary joint loosen or vibrate when the pump runs continuously?

The rotary mechanism is designed to hold its orientation once positioned; the 15 mm extension and 37.7 mm total height keep the joint clear of nearby parts so vibration does not change the angle.

Which G1/4 components must already be in the loop for this elbow to connect?

You need a male G1/4 port on the block, radiator or reservoir and a female G1/4 fitting on the tubing side; the elbow converts between them with a 90-degree turn.

Will the 15 mm extension clear a low-profile CPU block sitting next to a thick radiator?

The installed base height of 15 mm and total height of 37.7 mm provide enough offset to route tubing over or around adjacent low-profile blocks and thick radiators.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.