BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278448BTC
I lager
RIMLANCE
RIMLANCE RUD10600LS8C2K8 8GB (2x4GB) DDR3 1333 PC3-10600 1.35V UDIMM 1RX8 desktop RAM
An 8 GB dual-channel DDR3 kit running at 1333 MHz PC3-10600 with 1.35 V low-voltage operation
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor Brand Chipset
- Low-voltage operation at 1.35V reduces system power draw
- Dual-channel 8GB kit (2×4GB) boosts multitasking headroom
- DDR3 1333 speed delivers 10600 MT/s data rate
- Unbuffered UDIMM 1RX8 design fits standard desktop slots
- Major-brand chips provide reliable stability for everyday workloads
Kit purpose
This RIMLANCE kit supplies 8 GB of DDR3 desktop memory in a matched pair of 4 GB UDIMMs. It targets owners of older DDR3 platforms who need a straightforward capacity increase for everyday multitasking.
Build and connectors
Each module is an unbuffered, non-ECC DIMM built with major-brand chips and a 1RX8 organisation. The standard 240-pin UDIMM edge connector fits any desktop DDR3 slot, so installation is a simple press-in action without special tools or configuration.
Thermals and power
Operating at 1.35 V, the modules draw less power than standard 1.5 V DDR3, helping keep system temperatures lower during typical workloads. With no onboard lighting or active cooling, the kit runs silently and adds minimal heat to the chassis.
I korthet
- Low-voltage operation at 1.35V reduces system power draw
- Dual-channel 8GB kit (2×4GB) boosts multitasking headroom
- DDR3 1333 speed delivers 10600 MT/s data rate
- Unbuffered UDIMM 1RX8 design fits standard desktop slots
- Major-brand chips provide reliable stability for everyday workloads
Specifikationer
| Brand | RIMLANCE |
|---|---|
| Model | RUD10600LS8C2K8 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Frågor om den här produkten
What speed does the DDR3 1333 PC3-10600 interface actually run at?
The kit operates at 1333 MHz with a PC3-10600 data transfer rate, which is the standard ceiling for DDR3-1333 modules.
What physical slot and clearance does the UDIMM 1RX8 design need?
Each module is a standard 240-pin unbuffered DIMM; it fits any desktop DDR3 slot and the low-profile height clears most CPU coolers.
How do I install the two 4 GB sticks for dual-channel, and what step is often missed?
Place one stick in each matched-colour slot (usually slots 1 and 3), press down firmly until both side clips click, then verify 8 GB shows in BIOS.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
