SAMSUNG
SAMSUNG FF3D516G6000HC38ADC01 TS-H492C dvd burner
Internal IDE drive reads DVDs at 16x and writes CDs at 52x with 32x rewrite speed
- CD-R52X
- CD-RW32X
- DVD-ROM16X
- CD-ROM52X
- Form FactorInternal
- Panel ColorSilver
- Writes CDs at 52X for fast disc creation
- Rewrites CD-RW media at 32X for reliable backups
- Reads DVDs at 16X for smooth video playback
- Reads CDs at 52X for quick data access
- Internal IDE drive with silver front panel fits desktop builds
Samsung TS-H492C CD/DVD Combo Drive
The Samsung TS-H492C is an internal optical drive that reads DVDs at up to 16x and writes CDs at up to 52x. It fits a standard 5.25-inch bay and connects via an IDE interface. The silver front bezel matches traditional desktop aesthetics.
Suits builders maintaining legacy systems
This drive suits anyone replacing a failed unit in an older PC that still uses IDE cabling. It will not work for systems that lack an IDE header or for users who need DVD writing capability, as the device is limited to CD-R and CD-RW recording only.
IDE interface decides compatibility
The single specification that determines fit is the IDE interface, which requires a matching motherboard connector and ribbon cable. Without an available IDE port the drive cannot be installed, regardless of bay space or operating-system support.
I korthet
- Writes CDs at 52X for fast disc creation
- Rewrites CD-RW media at 32X for reliable backups
- Reads DVDs at 16X for smooth video playback
- Reads CDs at 52X for quick data access
- Internal IDE drive with silver front panel fits desktop builds
Specifikationer
| Brand | SAMSUNG |
|---|---|
| CD-R | 52X |
| CD-RW | 32X |
| DVD-ROM | 16X |
| CD-ROM | 52X |
| Form Factor | Internal |
| Panel Color | Silver |
| Interface | IDE |
| Package Contents | TS-H492C |
Frågor om den här produkten
How much heat and noise does the 16× DVD / 52× CD drive generate during all-day use?
The TS-H492C is a standard internal IDE combo drive; it draws modest power and runs quietly, producing only typical optical-drive warmth under continuous read or write loads.
What connection and bay does the IDE drive need to operate?
It requires a free 5.25-inch drive bay, a 40-pin IDE cable and a Molex power connector from the host system.
Will the TS-H492C work alongside older IDE hard drives on the same cable?
Yes — configure the drive as master or slave via its jumper block and share the IDE channel with legacy IDE storage devices.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.



