Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Rectangular green E1.S enterprise SSD with gold edge connector and silver label

Solidigm

Solidigm D7-PS1010 7.68TB E1.S 9.5mm PCIe 5.0 x4 TLC enterprise SSD SB5PHU7X076T001

SKU CH-EKTN-HYB69 MPN SB5PHU7X076T001

E1.S 9.5mm enterprise SSD with 7.68TB TLC capacity and PCIe 5.0 x4 interface

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory ComponentsTLC
  • InterfacePCI-Express 5.0 x4
  • SecurityNo Opal

Option 7.68TB E1.S 9.5mm

Visa 20 fler konfigurationer
  • 68TB capacity supports data-intensive workloads
  • PCIe 5.0 x4 interface delivers high throughput
  • E1.S 9.5mm form factor fits dense server chassis
  • TLC memory components balance endurance and cost
  • No Opal security simplifies deployment in non-encrypted environments

7.68TB E1.S enterprise SSD

The Solidigm D7-PS1010 delivers 7.68TB of TLC storage in an E1.S 9.5mm form factor. It targets data-centre operators who need high-capacity flash for read-intensive workloads. The drive connects through a PCI-Express 5.0 x4 interface. No Opal encryption is included.

Fits E1.S bays with PCIe 5.0 backplanes

The 9.5mm module slides into standard E1.S slots that support PCIe 5.0 x4 signalling. A compatible backplane and CPU or switch with Gen 5 lanes are required to reach full throughput. The single-port design frees additional lanes for other devices. Hot-plug capability depends on the enclosure implementation.

Enterprise thermal envelope

The drive operates within standard enterprise temperature limits when installed in a chassis with forced airflow across the E1.S cage. Power draw scales with PCIe 5.0 activity and TLC write cycles. Acoustic output is negligible because the unit has no moving parts. Adequate slot cooling is essential for sustained performance.

I korthet

  • 68TB capacity supports data-intensive workloads
  • PCIe 5.0 x4 interface delivers high throughput
  • E1.S 9.5mm form factor fits dense server chassis
  • TLC memory components balance endurance and cost
  • No Opal security simplifies deployment in non-encrypted environments

Specifikationer

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PHU7X076T001
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory ComponentsTLC
InterfacePCI-Express 5.0 x4
SecurityNo Opal
Fraktvikt0.12 kg
Paketstorlek140 × 110 × 16 mm

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does the 7.68TB TLC drive throttle under sustained PCIe 5.0 x4 workloads?

The drive uses TLC memory and a PCIe 5.0 x4 interface; thermal management depends on the server airflow across the E1.S 9.5mm form factor.

How loud or hot does the E1.S 9.5mm SSD get when running all day?

It has no moving parts and relies on the chassis cooling; power draw and temperature vary with the host system workload.

Must my server backplane support E1.S 9.5mm and PCIe 5.0 x4 to install this drive?

Yes, the drive requires an E1.S 9.5mm slot wired for PCIe 5.0 x4 and a compatible hot-plug backplane.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.