Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
White 80mm square case fan with red and black wires and white plug

SXDOOL

SXDOOL AD0805LX-A70GL 80mm 5V 0.23A Hypro case fan

SKU CH-WXK7-YSK2H

80 mm DC axial fan with Hypro bearing, 5 V 0.23 A, red/black leads and white 2-position plug

  • 5 V DC and 0.23 A draw keeps power use low
  • Hypro bearing design reduces friction for quieter operation
  • 80 × 80 × 25 mm frame fits standard 80 mm mounts
  • Red and black leads with white 2-position plug simplify wiring
  • Exact model AD0805LX-A70GL ensures correct replacement match

80 mm 5V DC case fan

The SXDOOL AD0805LX-A70GL is an 80 x 80 x 25 mm axial fan rated for 5V DC and 0.23 A. It uses an ADDA Hypro bearing and ships with red and black 2-wire leads ending in a white 2-position plug. One fan is included per pack. Verify the complete model label before ordering.

Suitable for 5 V low-current cooling slots

This fan fits equipment-cooling assemblies that require an 80 mm frame, 5 V supply and a two-wire connection. Builders needing a higher voltage, a larger frame, a three- or four-wire PWM interface or a different bearing type should look at other models. Match the original fan voltage and connector exactly before purchase.

5 V 0.23 A electrical rating

The decisive specification is the 5 V DC, 0.23 A rating printed on the fan label. Only systems designed for this exact voltage and current should use this unit. Supplying a different voltage or exceeding the rated current will damage the fan or the host equipment. Compare the label data with the original part before installation.

I korthet

  • 5 V DC and 0.23 A draw keeps power use low
  • Hypro bearing design reduces friction for quieter operation
  • 80 × 80 × 25 mm frame fits standard 80 mm mounts
  • Red and black leads with white 2-position plug simplify wiring
  • Exact model AD0805LX-A70GL ensures correct replacement match

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

Will the 80 x 80 x 25 mm frame and 5 V 0.23 A rating fit my existing 80 mm mounting points and power header?

The fan uses an 80 x 80 x 25 mm frame and draws 0.23 A at 5 V DC. Verify that your chassis has matching 80 mm screw holes and that the header supplies 5 V at or above 0.23 A before installing.

How can I confirm the Hypro bearing is running correctly once the fan is connected?

Power the system and listen for smooth, steady rotation without grinding or rattling. The red and black 2-wire leads with the white 2-position plug should deliver 5 V to the motor; consistent airflow through the 80 mm frame indicates normal operation.

What comes in the package and which cables or adapters must I source separately?

The box contains one ADDA AD0805LX-A70GL fan with red and black 2-wire leads ending in a white 2-position plug. No mounting screws, voltage adapters or alternative connectors are included.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.