Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black 60mm square case fan 10mm thick with three-pin connector

SXDOOL

SXDOOL DF126010BL 60mm 10mm 12V 3-pin ball bearing case fan

SKU CH-FDKS-K1B6G MPN DF126010BL

A 60 mm case fan with ball-bearing motor delivering 15-20 CFM at 3500-3999 RPM and 5-10 dBA noise on a 3-pin connector

  • Fan Size60mm
  • RPM3500-3999 RPM
  • Air Flow15-20 CFM
  • Noise Level5 - 10 dBA
  • Power Connector3 Pin
  • ColorBlack
  • 60 mm frame fits compact builds
  • 12 V ball-bearing motor runs at 3500-3999 RPM
  • 15-20 CFM airflow moves heat from tight spaces
  • 5-10 dBA keeps system noise low
  • 3-pin connector enables speed monitoring

Compact 60 mm 12 V case fan

The SXDOOL DF126010BL is a 60 mm square frame fan that mounts in tight chassis locations where larger rotors will not fit. It runs on 12 V power and draws 0.18 A, making it suitable for small-form-factor builds, rack-mount appliances or targeted component cooling. The 3-pin connector provides basic voltage control without PWM circuitry. Builders who need higher static pressure or larger airflow volumes should look elsewhere.

Ball-bearing thermals and acoustics

A ball bearing supports the rotor at speeds between 3500 and 3999 RPM, delivering 15 to 20 CFM of airflow while the manufacturer rates noise at 5 to 10 dBA. The supplier data sheet also lists a 4200 RPM sample point with 18.26 CFM and 32 dBA, showing how sound rises with voltage. Power draw stays low at 0.18 A to 0.20 A, so the fan adds minimal load to a 12 V rail.

Included mounting hardware only

The package supplies the fan unit and standard mounting screws for 60 mm hole patterns. No fan-speed controller, adapter cables, rubber anti-vibration pads or software utilities are bundled. The 3-pin lead connects directly to a motherboard header or fan hub; any speed adjustment depends on the host system’s voltage-regulation capability.

I korthet

  • 60 mm frame fits compact builds
  • 12 V ball-bearing motor runs at 3500-3999 RPM
  • 15-20 CFM airflow moves heat from tight spaces
  • 5-10 dBA keeps system noise low
  • 3-pin connector enables speed monitoring

Specifikationer

Fan Size60mm
RPM3500-3999 RPM
Air Flow15-20 CFM
Noise Level5 - 10 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED

Frågor om den här produkten

How do I mount the 60mm fan and which way should airflow point?

Use four screws through the 60mm square frame into your case fan slots; the label side is usually the intake, so aim it toward the component you want to cool.

When will the ball bearing need attention or replacement?

Ball bearings typically run for years; if noise rises above the rated 32 dBA or rotation becomes uneven, plan to swap the fan.

At what point does the 3-pin connector limit speed control under load?

Without a fourth PWM wire the motherboard can only vary voltage, so fine-grained speed curves below 3500 RPM are not possible.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.