SXDOOL
SXDOOL gm0503peb1-8 30mm case fan 5V 8500 rpm 26 dBA 3-pin
30 mm case fan running at 8500 rpm with 26 dBA noise on a 5 V 3-pin connector
- Fan Size30mm
- Compact 30 mm frame fits tight laptop or small-form-factor builds
- Ball-bearing design rated for 100000 hours of continuous operation
- 8500 rpm delivers 4.2 CFM airflow for focused component cooling
- Low 26 dBA noise level keeps systems quiet under load
- 5 V DC input with 3-pin 1.25 mm connector for straightforward installation
Compact 30 mm 5 V fan
This 30 mm square fan runs on 5 V and draws 0.6 W. It spins at 8500 rpm to deliver 4.2 CFM of airflow. The unit suits tight spaces such as laptop chassis, small-form-factor PCs or embedded boards where a slim profile is required.
Ball-bearing build with 1.25 mm 3-pin plug
A ball bearing supports the rotor for a rated 100000 hours of continuous operation. The original 1.25 mm three-pin connector fits compatible headers without adapters. Its 30 x 30 x 6 mm frame slides into narrow slots where larger fans cannot be mounted.
Low noise and modest static pressure
At full speed the fan produces 26 dBA while generating 0.12 inch-H₂O of static pressure. The 5 V supply and 0.6 W draw keep power demand minimal for portable or fanless-adjacent builds. It operates reliably across a 3 V to 6 V range for speed control flexibility.
I korthet
- Compact 30 mm frame fits tight laptop or small-form-factor builds
- Ball-bearing design rated for 100000 hours of continuous operation
- 8500 rpm delivers 4.2 CFM airflow for focused component cooling
- Low 26 dBA noise level keeps systems quiet under load
- 5 V DC input with 3-pin 1.25 mm connector for straightforward installation
Specifikationer
| Fan Size | 30mm |
|---|
Frågor om den här produkten
What does the 1.25 mm 3-pin connector mean for motherboard compatibility?
The fan uses a proprietary 1.25 mm 3-pin plug, so it will not fit standard 4-pin PWM or 3-pin headers without an adapter.
Will the 30 mm by 30 mm by 6 mm frame fit in my laptop or small-form-factor case?
The slim 30x30x6 mm housing is designed for tight spaces such as laptop chassis, miniature PCs or embedded boards.
How do I install the fan correctly and what is the common wiring mistake?
Connect the 1.25 mm 3-pin plug to a matching header or adapter, observing polarity; reversing the leads will prevent the fan from spinning.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



