Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two black 120mm square DC fans with sickle blades, controller and splitter cable

SXDOOL

SXDOOL SXD12025 2IN1 2-Fan DC Cooling Kit 120x120x25mm mining hardware

SKU CH-EVD5-DMGD1

Adjustable two-fan DC cooling kit with 120mm dual ball bearing fans, 3-12V controller and splitter for mining rigs and cabinets

  • Adjustable 3-12V DC control matches airflow to cooling needs
  • Dual 120mm fans deliver up to 94.5 CFM each at full speed
  • 100-240V AC adapter powers kit from any mains supply
  • Dual ball bearings and sickle blades sustain continuous mining operation
  • 120x120x25mm size with 105mm hole spacing fits standard rigs

SXD12025 2IN1 Adjustable Cooling Kit

The SXD12025 2IN1 is a complete adjustable cooling kit containing two 120 x 120 x 25mm DC fans, an adjustable AC-to-DC adapter, and a 2-way splitter cable. The adapter accepts 100-240V AC input and provides 3-12V DC output up to 2A through a 5.5 x 2.1mm interface. Each fan uses dual ball bearings and a 230mm lead with a DC 5.5 x 2.1mm female connector.

Suited for Targeted Mining Rig Cooling

This kit suits builders who need adjustable airflow for compatible BTC mining rigs, workstation cabinets, or equipment enclosures where the 105mm mounting-hole spacing and 4.3mm holes match. It is not for users who require direct AC-powered fans, as the included fans must never connect directly to 110V or 220V mains. Buyers needing different connector types, voltage ranges, or mounting patterns should look elsewhere.

Capacity and Airflow Headroom

Per-fan reference data shows 48 CFM at 3V and 1100 RPM, 58.8 CFM at 5V and 1600 RPM, 79 CFM at 10V and 2600 RPM, and 94.5 CFM at 12V and 3200 RPM. Corresponding noise levels range from 18.8 dBA to 38.5 dBA with power draw from under 0.2W to 5.02W per fan. The adapter's 2A maximum output limits combined current, so running both fans at the highest voltage setting will reach the controller's capacity ceiling.

I korthet

  • Adjustable 3-12V DC control matches airflow to cooling needs
  • Dual 120mm fans deliver up to 94.5 CFM each at full speed
  • 100-240V AC adapter powers kit from any mains supply
  • Dual ball bearings and sickle blades sustain continuous mining operation
  • 120x120x25mm size with 105mm hole spacing fits standard rigs

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

Will this kit run from a standard UK wall socket without extra converters?

Yes, the adapter accepts 100-240V AC at 50/60Hz, so it plugs directly into UK mains and outputs adjustable DC 3-12V up to 2A through a 5.5 x 2.1mm jack.

What mounting holes do the fans use and will they line up with standard 120mm fan grilles?

Each fan has four 4.3mm holes on a 105mm square pattern, matching the common 120mm mounting standard used on mining rigs and equipment cabinets.

How loud are the fans at full speed and can I lower the noise for office use?

At 12V a single fan reaches 38.5 dBA and 94.5 CFM; the controller lets you drop voltage to 3V where noise falls to 18.8 dBA and airflow to 48 CFM.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.