Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Ten black 2.85mm filament spools in a pack

Taulman 3D

Taulman 3D Alloy 910 2.85mm 1lb Black 10 Pack 3D Printers Accessories

SKU CH-MHNZ-JWET7

Ten spools of 2.85 mm black nylon-based filament printing at 250–255 °C on a 30–65 °C bed with 8,100 PSI tensile strength and 32 % elongation

  • ColorBlack
  • TypeFilament
  • Benchmark high-performance material trusted by aerospace and automotive professionals
  • Nylon-based polymer simplifies support removal compared to ABS printing
  • Ten-spool case delivers 1 lb of 2.85 mm filament per spool for volume production
  • 8,100 PSI tensile strength with 32 % elongation enables durable mechanical linkages
  • Prints at 250–255 °C on a 30–65 °C bed with a 95 °C working range

High-performance nylon filament for demanding prints

This ten-spool pack of Taulman Alloy 910 delivers a nylon-based polymer engineered for high tensile strength and durability. It targets professionals in aerospace, automotive, healthcare and general engineering who produce enclosures, high-impact parts or mechanical linkages. The material offers 8100 PSI tensile strength with 32% elongation for tough functional prototypes and production components.

Straightforward printing with heated bed required

Alloy 910 prints at 250C to 255C with a bed temperature between 30 and 65C, making it compatible with many direct-drive and Bowden setups that reach these temperatures. The nylon-based formulation eases support removal compared to typical ABS, reducing post-processing effort. Users must store spools dry and use a heated chamber or enclosure to manage the 95C working range and minimise warping on large parts.

Check nozzle diameter and drying capability first

Verify your printer accepts 2.85mm filament and can maintain a stable hot-end temperature at 250C or above without PTFE tubing degradation. A heated bed capable of at least 65C is essential for first-layer adhesion. Ensure you have a filament dryer or sealed storage with desiccant, as nylon absorbs moisture rapidly and wet filament causes poor layer bonding and surface defects.

I korthet

  • Benchmark high-performance material trusted by aerospace and automotive professionals
  • Nylon-based polymer simplifies support removal compared to ABS printing
  • Ten-spool case delivers 1 lb of 2.85 mm filament per spool for volume production
  • 8,100 PSI tensile strength with 32 % elongation enables durable mechanical linkages
  • Prints at 250–255 °C on a 30–65 °C bed with a 95 °C working range

Specifikationer

Brandtaulman3d
ColorBlack
TypeFilament

Frågor om den här produkten

How do I confirm the filament prints correctly after loading it?

Print a test part at 250–255 °C nozzle and 30–65 °C bed; the layers should bond firmly and the finished piece should feel stiff with a working range up to 95 °C.

What comes in the box and what must I supply separately?

The pack contains ten 1 lb spools of 2.85 mm black Alloy 910 filament; you will need a 3D printer that accepts 2.85 mm material and a heated bed capable of 30–65 °C.

Which pack size should I choose for a production run?

This listing is a fixed 10-spool case giving 10 lb total; if you need more material, order multiple cases.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.