Team Group
Team Group TM8FFW002T0C129 2TB internal SSD
M.2 2280 2TB PCI-Express 4.0 x4 NVMe SSD with heatsink, up to 7000 MBps read and 6100 MBps write, 1000 TBW endurance
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
- Fast game loads with up to 7000 MBps sequential read
- Large project files write quickly at up to 6100 MBps
- 1000 TBW rating supports heavy daily workloads
- 5 million hour MTBF indicates long-term reliability
- Included heatsink keeps temperatures in check during sustained transfers
2TB NVMe drive with integrated heatsink
This M.2 2280 SSD targets consumer PCs that need PCIe 4.0 x4 bandwidth for large game libraries or content-creation workloads. The 2TB capacity and 3D NAND flash provide ample space without a DRAM cache, relying on host memory buffer instead.
Thermals noise and power draw
An aluminium heatsink ships pre-attached and keeps the controller within the 0°C to 70°C operating window during sustained transfers. With no moving parts the drive is silent, and the NVMe interface draws power only when active, reducing idle consumption.
What the heatsink changes
The bundled heatsink adds 3.7mm of height so the module fits tight laptop slots or desktop boards with low clearance. It also spreads heat across a larger surface, helping the drive maintain the 7000 MBps read and 6100 MBps write peaks for longer periods.
I korthet
- Fast game loads with up to 7000 MBps sequential read
- Large project files write quickly at up to 6100 MBps
- 1000 TBW rating supports heavy daily workloads
- 5 million hour MTBF indicates long-term reliability
- Included heatsink keeps temperatures in check during sustained transfers
Specifikationer
| Brand | Team Group |
|---|---|
| Series | T-FORCE Z44A7Q |
| Model | TM8FFW002T0C129 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe |
| Cache | No DRAM (HMB) |
| Max Sequential Read | Up to 7000 MBps |
| Max Sequential Write | Up to 6100 MBps |
| Terabytes Written (TBW) | 1000TB |
| MTBF | 1,500,000 hours |
| HeatSink | with HeatSink |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1,500G/0.5ms |
| Max Vibration Resistance | 80Hz~2,000Hz/20G |
| Height | 3.7mm |
| Width | 80.0mm |
| Depth | 22.0mm |
| Weight | 7g |
| Fraktvikt | 0.20 kg |
| Paketstorlek | 124 × 94 × 12 mm |
Frågor om den här produkten
How do I install the M.2 2280 drive with its attached HeatSink and what step is often missed?
Insert the drive at an angle into the motherboard M.2 slot, press it flat and secure it with the single mounting screw; the step often missed is removing any protective film from the HeatSink thermal pads before fitting.
What maintenance or replacement will the 2TB drive need later?
No scheduled maintenance is required; the drive has no user-serviceable parts, and replacement is only needed if the 1000TB endurance limit or the 1500000-hour MTBF rating is reached.
What limit appears first during sustained heavy writes on this PCI-Express 4.0 x4 SSD?
The integrated HeatSink manages thermals up to the 70°C operating ceiling; if workloads exceed cooling capacity the controller will throttle sequential write speeds below the 6100 MBps maximum to protect the 3D NAND.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
