Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two black DDR4 UDIMM sticks, 288 pins, 134 by 32 mm, 32 GB kit

Timetec

Timetec 32GB (2x16GB) DDR4 2666MHz CL19 1.2V UDIMM desktop RAM

SKU CH-F6CG-HMNVV

A 32 GB dual-channel DDR4 kit running at 2666 MHz with CL19 latency and 1.2 V operation

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2666 (PC4 21300)
  • Voltage1.20V
  • ColorBlack PCB

Capacity 32GB (2 x 16GB)

Speed DDR4 2666 (PC4 21300)

  • 32 GB capacity with two 16 GB modules enables heavy multitasking
  • DDR4 2666 MHz speed rated at PC4-21300 bandwidth
  • CL19 latency at 2666 MHz for responsive operation
  • 2 V low-voltage design reduces power draw
  • 288-pin UDIMM form factor fits standard desktop slots

Capacity and kit layout

This Timetec kit delivers 32GB of DDR4 desktop memory in two 16GB modules. It is built for standard 288-pin UDIMM slots and runs at 1.2V. The black PCB uses a dual-rank 2Rx8 design. It is not compatible with laptop SODIMM slots.

Speed headroom and limits

The modules are rated for 2666MHz at CL19 and carry a PC4-21300 designation. Lower JEDEC steps of 2133MHz CL15 and 2400MHz CL17 are also supported, while 3200MHz CL22 is listed as a higher frequency tier the same components can reach. Bandwidth scales with the chosen speed step.

Deciding specification

The critical figure is the 2666MHz CL19 rating at 1.2V on a 288-pin UDIMM. If your desktop motherboard requires DDR4 UDIMM memory at that speed and latency, this kit fits; if the board needs SODIMM, ECC, registered or a different voltage, it will not work.

I korthet

  • 32 GB capacity with two 16 GB modules enables heavy multitasking
  • DDR4 2666 MHz speed rated at PC4-21300 bandwidth
  • CL19 latency at 2666 MHz for responsive operation
  • 2 V low-voltage design reduces power draw
  • 288-pin UDIMM form factor fits standard desktop slots

Specifikationer

BrandTimetec
ModelMM-DR4/16G/2666
Capacity32GB (2 x 16GB)
SpeedDDR4 2666 (PC4 21300)
Voltage1.20V
ColorBlack PCB

Andra versioner av den här modellen

3 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Will this 32 GB kit fit a standard desktop motherboard with 288-pin DDR4 slots?

Yes, the modules are 288-pin UDIMM DDR4 designed for desktop systems that accept unbuffered non-ECC memory.

My board only runs at 2400 MHz — will these modules still work?

The kit is rated for 2666 MHz CL19 and will down-clock to 2400 MHz at CL17 or 2133 MHz at CL15 automatically.

Do I need to adjust voltage or BIOS settings for this 1.2 V kit?

No, the modules operate at the standard 1.2 V DDR4 voltage and are plug-and-play on compatible boards.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.