Transcend
Transcend TS128GMTE110S 128GB M.2 2280 internal SSD
M.2 2280 NVMe drive delivers up to 1,500 MB/s read and 400 MB/s write for ultrabooks, laptops and desktops
- Device TypeInternal Solid State Drive (SSD)
- Used Forpersonal, gaming, business
- Form FactorM.2
- Interfaceserial_ata
- ProtocolPCIe Gen3 x4, NVMe 1.3
- ConnectorPCIe Gen3 x4, NVMe 1.3
- PCIe Gen3 x4 interface with NVMe 1.3 standard delivers up to 1500 MB/s sequential read
- LDPC error correction and RAID engine protect data integrity during heavy workloads
- Built-in SLC caching technology accelerates transfer speeds for demanding applications
- Dynamic thermal throttling mechanism maintains stable performance under sustained loads
- Compact M.2 2280 form factor fits ultrabooks, laptops and desktops alike
PCIe Gen3 x4 NVMe 1.3 SSD for heavy workloads
The Transcend TS128GMTE110S is a 128GB M.2 2280 internal solid-state drive built for personal, gaming and business systems. It uses the PCIe Gen3 x4 interface with the NVMe 1.3 standard to deliver sequential reads up to 1500 MB/s and writes up to 400 MB/s. 3D NAND flash and SLC caching support sustained performance during demanding tasks.
PCIe Gen3 x4 bandwidth limits peak throughput
The PCIe Gen3 x4 link caps maximum sequential transfer rates at the stated 1500 MB/s read and 400 MB/s write figures. Random 4KB performance reaches 2280 MB/s read and 1500 MB/s write within that same interface constraint. Dynamic thermal throttling protects the controller when sustained loads push temperatures higher.
Upgrades from older PCIe or AHCI drives
Replacing an earlier PCIe Gen2 or AHCI-based M.2 drive with this NVMe 1.3 model raises sequential bandwidth and adds LDPC error correction for data integrity. The jump is worth it when workloads involve large media files, heavy multitasking or boot-driven applications that benefit from the higher queue depth and lower latency of the Gen3 x4 interface.
I korthet
- PCIe Gen3 x4 interface with NVMe 1.3 standard delivers up to 1500 MB/s sequential read
- LDPC error correction and RAID engine protect data integrity during heavy workloads
- Built-in SLC caching technology accelerates transfer speeds for demanding applications
- Dynamic thermal throttling mechanism maintains stable performance under sustained loads
- Compact M.2 2280 form factor fits ultrabooks, laptops and desktops alike
Specifikationer
| Brand | Transcend |
|---|---|
| Model | 1 |
| Part Number | TS128GMTE110S |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | personal, gaming, business |
| Form Factor | M.2 |
| Interface | serial_ata |
| Protocol | PCIe Gen3 x4, NVMe 1.3 |
| Connector | PCIe Gen3 x4, NVMe 1.3 |
| Cache | 1 unknown_modifier |
| Max Sequential Read | 1500 megabits_per_second |
| Max Sequential Write | 400 |
| Sustained Random 4KB Read | 2280 megabits_per_second |
| 4KB Random Write | 1500 megabits_per_second |
| Features | 1500 megabytes_per_second |
| Height | 3.15 in x 0.14 in x 0.87 in |
| Width | 3.15 in x 0.14 in x 0.87 in |
| Depth | 3.15 in x 0.14 in x 0.87 in |
| Weight | 0.02 lb |
| Package Content | SSD |
Frågor om den här produkten
What capacity should I pick for this 128GB M.2 2280 drive?
The TS128GMTE110S is offered in a single 128GB capacity, so there is no version choice to make.
What does the 1,500 MB/s sequential read figure mean once the drive is installed?
It represents the peak sequential read speed over the PCIe Gen3 x4 link using NVMe 1.3; real-world throughput will be lower and depends on the host system.
Which interface standard does this SSD use and what speed ceiling does it impose?
It uses the PCIe Gen3 x4 interface with NVMe 1.3, which caps the maximum theoretical throughput at the stated 1,500 MB/s read and 400 MB/s write.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
