Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Two black and silver DDR5 memory modules with RGB light bars and two matching filler sticks

V-color

V-color XFinity RGB 32GB (2×16GB) DDR5 8200MHz CL38 SCC 2+2 Kit Black/Silver

SKU CH-6714-DRR8D

A 32 GB dual-channel DDR5 kit running at 8200 MHz with CL38 latency includes two 16 GB modules plus two RGB filler sticks for a full four-slot look

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 8200 (PC5 65600)
  • Timing38-48-48-128
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 32GB (2 x 16GB)

  • 32GB (2 x 16GB)
  • 48GB (2 x 24GB)

Genomstrukna varianter finns, men är inte i lager här.

Speed DDR5 8200 (PC5 65600)

  • DDR5 8400 (PC5 67200)
  • DDR5 8200 (PC5 65600)
  • DDR5 8000 (PC5 64000)

Genomstrukna varianter finns, men är inte i lager här.

Color Black / Silver

  • 32 GB dual-channel kit delivers 8200 MT/s high-speed performance
  • CL38 38-48-48-128 timings tuned for low-latency responsiveness
  • Hynix ICs provide stability for heavy workloads and overclocking headroom
  • 16 ultra-broad beam LEDs create vibrant RGB lighting across four modules
  • Patented RGB filler kit completes four-slot motherboards with symmetrical illumination

32GB Dual-Channel DDR5 Kit

This V-color XFinity RGB kit delivers 32GB of DDR5 memory across two 16GB modules rated at 8200MHz with CL38 timings. It runs at 1.45V and uses Hynix ICs on a 288-pin unbuffered PCB. The package also includes two RGB filler modules that contain no DRAM and serve only to complete a four-slot layout with matching lighting.

SCC 2+2 Layout for Four-Slot Boards

The kit suits builders who populate all four DIMM slots and want uniform RGB illumination without buying four memory modules. It is not suited for systems limited to two slots or for users who need 64GB or more of usable capacity, because the filler sticks add no storage.

32GB Usable Capacity with 8200MHz Headroom

The two active modules provide 32GB of addressable memory, enough for modern gaming and multitasking workloads. The XMP profile targets 8200MHz at 38-48-48-128, and the manufacturer notes potential to reach 8800MT/s on compatible four-DIMM motherboards. Workloads that demand more than 32GB will require a higher-capacity kit.

I korthet

  • 32 GB dual-channel kit delivers 8200 MT/s high-speed performance
  • CL38 38-48-48-128 timings tuned for low-latency responsiveness
  • Hynix ICs provide stability for heavy workloads and overclocking headroom
  • 16 ultra-broad beam LEDs create vibrant RGB lighting across four modules
  • Patented RGB filler kit completes four-slot motherboards with symmetrical illumination

Specifikationer

BrandV-Color
SeriesXFinity RGB
ModelTMXFCL1682838KS-DK
Part NumberTMXFCL1682838KS-DK
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 8200 (PC5 65600)
Timing38-48-48-128
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetHynix IC
ColorBlack / Silver
FeaturesHigh speed/Colorful/Cost effective CUDIMM Kit for Intel XMP motherboards

Andra versioner av den här modellen

1 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What motherboard layout is required to use the two RGB filler modules included in the SCC 2+2 Kit?

A motherboard with four DDR5 DIMM slots is required so the two 16 GB memory modules and the two filler modules can fill all four slots for a symmetrical look.

Will the kit run at its rated 8200 MT/s speed on a board that only supports DDR5 5600 without XMP?

The modules will default to the standard JEDEC speed supported by the board; enabling the Intel XMP profile in the BIOS is needed to reach the rated 8200 MT/s with CL38 timings at 1.45 V.

How can I verify the RGB lighting on both the memory and filler modules is synchronised after installation?

Open the RGB control software from your motherboard vendor or Signal RGB; all four modules — two DRAM and two fillers — should appear as addressable devices and respond to the same lighting effects and colour changes.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.