Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Black metal 2.5 inch SAS drive tray caddy with four mounting screws

Vszerda

Vszerda 2.5" SAS hard drive tray caddy 500223-1 PACK

SKU CH-FQ7P-4944E

Mounts a 2.5" SAS drive in HP ProLiant DL, ML and BL servers plus StorageWorks arrays

  • ColorBlack
  • Dimensions16.0 in x 9.0 in x 2.5 in
  • Weight0.059 kilograms
  • SAS interface enables direct server backplane connection
  • Fits 2.5 inch drives in HP ProLiant DL and ML servers
  • Supports Integrity BL and StorageWorks arrays
  • Metal construction with included mounting screws
  • Compact 6.3 x 3.54 x 0.98 inch form factor

2.5" SAS tray for HP ProLiant

This Vszerda tray caddy fits a single 2.5" SAS hard drive into the drive bays of HP ProLiant DL, ML and BL servers from the G5, G6 and G7 families. It also matches the sled format used in HP Integrity blades and StorageWorks arrays. The metal frame ships with four mounting screws for immediate installation.

Capacity and headroom

The caddy accepts one 2.5" drive and presents a standard SAS connector to the backplane. It adds no controller or expander, so total storage is limited to the single device installed. Builders needing multiple drives must populate additional bays with separate caddies.

Thermals, noise and power

The tray has no active cooling or electronics of its own; it relies entirely on the server chassis airflow. In normal operation it contributes no audible noise and draws no power beyond the drive itself. The metal construction conducts heat from the drive into the chassis cooling path.

I korthet

  • SAS interface enables direct server backplane connection
  • Fits 2.5 inch drives in HP ProLiant DL and ML servers
  • Supports Integrity BL and StorageWorks arrays
  • Metal construction with included mounting screws
  • Compact 6.3 x 3.54 x 0.98 inch form factor

Specifikationer

BrandHeretom
ColorBlack
Dimensions16.0 in x 9.0 in x 2.5 in
Weight0.059 kilograms

Frågor om den här produkten

Will this tray fit the HP ProLiant DL380 G6 I already have?

Yes, the caddy is listed for the DL380 G6 and uses the SAS interface those servers expect.

How can I confirm the tray is seated correctly once installed?

The drive should click into the backplane and the server's drive LED will show activity when the system powers on.

Does the package include the four mounting screws I need?

The box contains the tray and four screws, so no extra hardware is required.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.