Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Metal 2U server power supply frame with two 550W modules installed

WMtec

WMtec CRPS 2U Server AC-148A DPS-550AB 550W Dual Power Modules

SKU CH-CXYE-RJT2W

CRPS 2U server frame accepts 300 W to 1200 W modules with 24+8+8 motherboard connector, 10 IDE and 2 SATA interfaces

  • Dual 550 W modules deliver redundant power for uptime
  • CRPS 2 U form factor fits standard 77 mm server bays
  • Frame accepts 300 W to 1 200 W modules for flexible scaling
  • 24+8+8 motherboard connector with removable 4+4 section eases cable routing
  • Ten IDE and two SATA drive connectors support legacy and modern storage

Delta CRPS 2U 550 W redundant power module

This unit is a CRPS-standard 2U server power supply designed for rack-mount systems that require hot-swap redundancy. It delivers 550 W per module and fits the 77 mm wide form factor used in compatible Delta frames. The package includes two modules for immediate fail-over capability. Target users are integrators and IT teams building or maintaining enterprise-grade servers.

Capacity headroom at 550 W per module

Each module provides 550 W, while the shared frame also accepts 300 W, 650 W, 800 W and 1200 W units for future scaling. The 24+8+8 motherboard connector with removable 4+4 section, ten IDE and two SATA outputs cover typical mid-range server loads. Systems demanding more than 550 W per slot will need higher-wattage modules or additional frames.

Replaces single non-redundant supplies in CRPS

The dual-module kit upgrades a single-unit configuration to N+1 redundancy without changing the rack footprint. The jump is worthwhile when uptime requirements justify the second module and the existing chassis supports the CRPS 2U 77 mm form factor. Builders needing non-CRPS form factors or different connector layouts cannot use this kit.

I korthet

  • Dual 550 W modules deliver redundant power for uptime
  • CRPS 2 U form factor fits standard 77 mm server bays
  • Frame accepts 300 W to 1 200 W modules for flexible scaling
  • 24+8+8 motherboard connector with removable 4+4 section eases cable routing
  • Ten IDE and two SATA drive connectors support legacy and modern storage

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Frågor om den här produkten

Will the 77 mm wide CRPS frame fit in the same 2U rack space as my current 550 W modules?

Yes, the CRPS frame is 77 mm wide and accepts 300 W, 550 W, 650 W, 800 W and 1200 W modules, so existing 550 W units can stay in the same 2U bay.

How can I verify the AC-148A frame is delivering power to the motherboard after installation?

The frame provides a 24+8+8 pin motherboard connector with a removable 4+4 section; when the system posts and all rails report voltage, the supply is working.

Does the package include the 10 IDE and 2 SATA drive cables, or must I source them separately?

The frame includes 10 IDE and 2 SATA connectors on the backplane; drive cables for those interfaces are not supplied and must be purchased separately.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.