Zyvpee
Zyvpee DS12025B12E -P039 120mm 4-pin case fan
120 mm case fan with 4-pin PWM control, ball bearing and 1600–1999 RPM range
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- RPM1600-1999 RPM
- Power Connector4 Pin
- ColorBlack
- Ball-bearing reliability for long service life
- 12 V 0.2 A draw keeps power use low
- 4-pin PWM connector enables precise speed control
- 1600-1999 RPM range delivers strong airflow
- 120 mm × 25 mm frame fits standard case mounts
What this fan fits
The Zyvpee DS12025B12E is a 120mm case fan built for standard mounting points in PC chassis. It runs on 12V at .2A and uses a 4-pin connector for PWM control. The black, non-LED frame suits builders who want airflow without lighting.
Speed range decides cooling headroom
The motor spins between 1600 and 1999 RPM, setting the maximum airflow and noise ceiling. Ball bearings support that range over long duty cycles. If your thermal target needs higher static pressure or lower minimum speed, this spec range is the limiting factor.
Simple 4-pin install, watch the clearance
Four pins plug straight into a motherboard or fan hub header; no adapter is required. The 25mm thickness fits most 120mm bays, but tight radiator stacks or slim cases can foul the frame. Verify depth before mounting.
I korthet
- Ball-bearing reliability for long service life
- 12 V 0.2 A draw keeps power use low
- 4-pin PWM connector enables precise speed control
- 1600-1999 RPM range delivers strong airflow
- 120 mm × 25 mm frame fits standard case mounts
Specifikationer
| Brand | Zyvpee |
|---|---|
| Series | DS12025 |
| Model | DS12025B12E |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| RPM | 1600-1999 RPM |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 120 * 25mm |
| Package Contents | refer to title |
Frågor om den här produkten
What does the 1600-1999 RPM range mean for airflow inside a case?
The fan spins between 1600 and 1999 revolutions per minute, moving a moderate volume of air through a 120mm frame for standard case cooling.
How does the 4-pin connector control the fan speed?
The 4-pin PWM header lets the motherboard adjust speed precisely between 1600 and 1999 RPM based on temperature curves.
Will the 120 by 25 mm frame fit my case mount?
It matches the common 120mm square mounting pattern with a 25mm thickness, so it fits most standard case fan slots.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001048BTC
I lager