Zyvpee
Zyvpee EFB0405LA R00 40mm 4010 5V 0.1A 3-Wire Case Fan
A 40 mm ball-bearing case fan running at 5 V and 0.1 A with a three-wire connector
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- LEDNon-LED
- FeaturesCase Fan
- Ball-bearing design ensures long-term reliability
- 5 V 0.1 A power draw keeps energy use low
- 40 mm x 10 mm frame fits tight build spaces
- Three-wire connector enables speed monitoring
- Non-LED black finish suits subtle system aesthetics
Zyvpee EFB0405LA 40mm Case Fan
This 40mm square case fan runs on 5V DC at 0.1A using a three-wire connection. It fits 4010 mounting holes and uses a ball bearing for rotation. The black frame carries no LED lighting.
For tight 5V chassis spots
Builders fitting a 40mm bracket in a small-form-factor chassis or replacing a Delta 4010 unit will find the dimensions and voltage match. Buyers who need PWM speed control, higher static pressure, or a larger frame should look at other models.
5V 0.1A three-wire power
The fan draws 0.1A at 5V through its three-pin connector, so the header must supply that voltage and current. Verify the motherboard or controller provides a 5V three-pin header before ordering.
I korthet
- Ball-bearing design ensures long-term reliability
- 5 V 0.1 A power draw keeps energy use low
- 40 mm x 10 mm frame fits tight build spaces
- Three-wire connector enables speed monitoring
- Non-LED black finish suits subtle system aesthetics
Specifikationer
| Brand | 3ccooler.com |
|---|---|
| Series | EFB0405LA R00 |
| Model | EFB0405LA |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Features | Case Fan |
| Dimensions | 40*10MM |
Frågor om den här produkten
Does my motherboard need a 3-pin header to run the 3-wire 5V 0.1A fan?
Yes, the fan uses a 3-wire connector that plugs directly into a standard 3-pin fan header supplying 5V power.
Will the 40*10MM ball-bearing fan fit in the same mounting holes as my older 4010 cooler?
The 40mm square frame and 10mm thickness match the 4010 form factor, so existing mounting points should align.
How can I confirm the EFB0405LA R00 is spinning at the correct speed after installation?
Check the RPM reading in BIOS or monitoring software; a steady value with no error alert means the 3-wire tachometer signal is working.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001048BTC
I lager