Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Square black 35mm case fan with maglev bearing and two wires

Zyvpee

Zyvpee KDE0535PFV2-8 35mm 5V .8W 2-pin case fan

SKU CH-F7VA-7RYCZ

A 35 mm Maglev CPU cooler fan running below 1600 RPM with a 2-pin 5 V .8 W connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Fan Size35mm
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • Compact 35 mm frame fits tight notebook bays
  • Maglev bearing runs below 1600 RPM for quiet cooling
  • Low 5 V .8 W draw keeps power use minimal
  • Simple two-pin connector enables quick drop-in install
  • Non-LED black finish suits stealth builds

Compact 35 mm CPU cooler fan

The Zyvpee KDE0535PFV2-8 is a 35 mm square fan built for CPU coolers in tight spaces. It runs on 5 V DC and draws 0.8 W, making it suitable for notebook-style cooling assemblies. The maglev bearing keeps friction low at speeds below 1600 RPM. No LED lighting is included.

Maglev bearing and two-wire power

A maglev bearing reduces mechanical wear and keeps acoustic output low during continuous operation. The 2-pin connector supplies power without PWM control, so speed is fixed by the voltage rail. At 10 mm thick the frame fits slim heatsink stacks where taller fans cannot mount. Black finish matches most cooler shrouds.

Replaces worn 35 mm cooler fans

This unit serves as a direct swap for failed or noisy 35 mm fans on existing CPU coolers. The upgrade is worth it when the original sleeve-bearing fan has developed rattle or reduced airflow. It is not for builders who need PWM speed curves or larger frame sizes for higher static pressure.

I korthet

  • Compact 35 mm frame fits tight notebook bays
  • Maglev bearing runs below 1600 RPM for quiet cooling
  • Low 5 V .8 W draw keeps power use minimal
  • Simple two-pin connector enables quick drop-in install
  • Non-LED black finish suits stealth builds

Specifikationer

BrandZyvpee
SeriesKDE0535PFV2-8
ModelKDE0535PFV2-8
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Fan Size35mm
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesMini Cooling
Dimensions35*10MM

Frågor om den här produkten

What does the 2-pin 5 V .8 W connector limit for speed control?

The two-wire 5 V .8 W link provides power only, so the fan runs at a fixed rate up to 1600 RPM without PWM or voltage regulation.

What clearance does the 35 mm by 10 mm frame require?

The square 35 mm by 10 mm body fits a 35 mm square cut-out and needs 10 mm depth behind the mounting plane.

How is the Maglev bearing fan installed and what step is often missed?

Align the four corner holes, insert screws through the chassis into the fan frame, then connect the two-pin plug to the 5 V header; skipping the plug leaves the fan dead.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.