Zyvpee
Zyvpee KDE1206PTV2 60x25mm 12V .8W 3-pin case fan
Compact 60x25mm case fan delivers 12V CPU cooling at under 1600 RPM with ball bearing and three-pin connector
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeBall
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- Ball bearing for durable operation
- 12 V .8 W power draw for low energy use
- 60 x 25 mm size fits tight chassis spaces
- Three-pin connector enables speed monitoring
- Under 1600 RPM keeps noise levels down
Compact 60 mm CPU cooler fan
The Zyvpee KDE1206PTV2 is a 60 by 25 mm case fan built for CPU cooling duties. It runs on 12 V power and draws .8 W through a standard three-pin connector. The black, non-LED frame uses a ball bearing rated for speeds below 1600 RPM.
Three-pin voltage control limit
A three-pin header adjusts speed by varying voltage, so the fan cannot accept PWM signals for finer control. Motherboard headers that only output PWM may not regulate this fan correctly. Check that your board provides voltage-based speed control on the chosen header.
Verify cooler mounting and header
Measure the fan mounting holes on your existing cooler to confirm 60 mm spacing before ordering. Ensure a free three-pin fan header is available on the motherboard or controller. The physical photos show the exact connector orientation and frame profile for visual confirmation.
I korthet
- Ball bearing for durable operation
- 12 V .8 W power draw for low energy use
- 60 x 25 mm size fits tight chassis spaces
- Three-pin connector enables speed monitoring
- Under 1600 RPM keeps noise levels down
Specifikationer
| Brand | Zyvpee |
|---|---|
| Series | KDE1206PTV2 |
| Model | KDE1206PTV2 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Ball |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 60*25MM |
Frågor om den här produkten
Should I pick the KDE1206PTV2 or a different 60 mm fan for my CPU cooler?
The KDE1206PTV2 is a 60*25 mm, 12 V, .8 W, 3-pin ball-bearing fan rated under 1600 RPM, so choose it when those exact dimensions, voltage and connector match your cooler’s mounting holes and header.
What does the sub-1600 RPM rating mean once the fan is installed in my case?
It indicates the maximum rotational speed the motor reaches at full 12 V; actual speed will vary with motherboard voltage control and thermal load, delivering airflow proportional to the duty cycle applied.
How does the 3-pin connector limit speed control compared with a 4-pin PWM fan?
A 3-pin header varies voltage to change RPM, so the board can still regulate speed but without the precise duty-cycle signalling that a fourth PWM wire provides.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



