iStarUSA Inc.
iStarUSA Inc. D-416-B10SA-BL-BLUE 4U server chassis 10 x 3.5" bays
- Rackmount
- 4U
$251,99
0.0032522BTC
Stokta
iStarUSA Inc.
iStarUSA Inc. D-416-B10SA-SLV-SLV 4U Rackmount Server Chassis 10x3.5
A 4U rackmount server chassis with ten hot-swap 3.5-inch drive bays, ATX motherboard support and seven expansion slots
- Chassis TypeRackmount
- Form Factor4U
- Case MaterialMetal/ Aluminum
- Motherboard CompatibilityATX
- Hot-Swap Drive Bays10 x 3.5"
- Expansion Slots7
Model D-416-B10SA-SLV-SLV
- D-416-B10SA-BL-BLUE
- D-416-B10SA-SLV-SLV
- D416-B10SL-SL
- Ten hot-swap 3.5" bays give high-density storage
- 4U rackmount form factor fits standard server racks
- Metal and aluminium construction provides sturdy enclosure
- ATX motherboard support enables flexible system builds
- Seven expansion slots allow multiple add-in cards
4U Rackmount Chassis with Ten Hot-Swap Bays
The iStarUSA D-416-B10SA-SLV-SLV is a 4U rackmount server chassis built from metal and aluminium. It accepts ATX motherboards and provides ten front-accessible 3.5" hot-swap drive bays for high-density storage. Seven expansion slots support additional controller or network cards. A front panel includes two USB 2.0 connectors, power and HDD LEDs, plus power and reset switches.
Storage-Focused Builds Not Suited for Compact Racks
This chassis suits administrators who need many drive bays in a standard 4U height and who plan to use an ATX power supply. Builders requiring 2.5" bay density, tool-less drive trays, or a shorter depth for shallow racks should consider other form factors. The design also assumes PS2-style ATX power supplies rather than redundant or hot-swap units.
Ten 3.5-Inch Hot-Swap Drive Bays Define Capacity
The single specification that determines fit is the ten 3.5" hot-swap bays, which set the maximum number of mechanical drives the system can hold. Verify that your backplane, controllers, and cabling match this bay count before purchase.
Öne çıkanlar
- Ten hot-swap 3.5" bays give high-density storage
- 4U rackmount form factor fits standard server racks
- Metal and aluminium construction provides sturdy enclosure
- ATX motherboard support enables flexible system builds
- Seven expansion slots allow multiple add-in cards
Teknik özellikler
| Brand | iStarUSA |
|---|---|
| Model | D-416-B10SA-SLV-SLIVER |
| Chassis Type | Rackmount |
| Form Factor | 4U |
| Case Material | Metal/ Aluminum |
| Motherboard Compatibility | ATX |
| Hot-Swap Drive Bays | 10 x 3.5" |
| Expansion Slots | 7 |
| Front Ports | Front USB 2.0 x 2 Connector |
| Features | Power and HDD LED Power and Reset Switch Support ATX PS2 Power Supply |
| Dimensions | 21.0" x 19.0" x 5.25" |
| Kargo ağırlığı | 14.74 kg |
| Koli boyutu | 635 × 533 × 254 mm |
Bu modelin diğer sürümleri
Aynı seriden 2 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
iStarUSA Inc.
iStarUSA Inc. D416-B10SL-SL 4U server chassis, 10 x 3.5" SAS/SATA hot-swap bays
- Rackmount
- 4U
$424,99
0.00548495BTC
StoktaBu ürünle ilgili sorular
Will the ten 3.5-inch hot-swap drive bays require any backplane maintenance over time?
The chassis provides ten 3.5-inch hot-swap bays; the backplane is a passive connector board with no moving parts, so no scheduled maintenance is needed beyond keeping the bay area free of dust.
What limits how many full-length expansion cards I can install in the seven slots?
The 21.0-inch depth allows most full-length cards, but the ATX power-supply position at the rear may reduce usable length for the slot closest to it.
How much heat and noise should I expect when the chassis runs continuously with all bays populated?
The unit ships without fans; thermal performance and noise depend entirely on the ATX PS2 supply and any case fans you add, so plan airflow to match your drive count.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214,99
0.00277467BTC
Stokta
