iStarUSA Inc. D-416-B10SA-BL-BLUE 4U server chassis 10 x 3.5" bays
- Rackmount
- 4U
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
iStarUSA Inc.
A 4U rackmount server chassis with ten hot-swap 3.5-inch drive bays, ATX motherboard support and seven expansion slots
Model D-416-B10SA-SLV-SLV
The iStarUSA D-416-B10SA-SLV-SLV is a 4U rackmount server chassis built from metal and aluminium. It accepts ATX motherboards and provides ten front-accessible 3.5" hot-swap drive bays for high-density storage. Seven expansion slots support additional controller or network cards. A front panel includes two USB 2.0 connectors, power and HDD LEDs, plus power and reset switches.
This chassis suits administrators who need many drive bays in a standard 4U height and who plan to use an ATX power supply. Builders requiring 2.5" bay density, tool-less drive trays, or a shorter depth for shallow racks should consider other form factors. The design also assumes PS2-style ATX power supplies rather than redundant or hot-swap units.
The single specification that determines fit is the ten 3.5" hot-swap bays, which set the maximum number of mechanical drives the system can hold. Verify that your backplane, controllers, and cabling match this bay count before purchase.
| Brand | iStarUSA |
|---|---|
| Model | D-416-B10SA-SLV-SLIVER |
| Chassis Type | Rackmount |
| Form Factor | 4U |
| Case Material | Metal/ Aluminum |
| Motherboard Compatibility | ATX |
| Hot-Swap Drive Bays | 10 x 3.5" |
| Expansion Slots | 7 |
| Front Ports | Front USB 2.0 x 2 Connector |
| Features | Power and HDD LED Power and Reset Switch Support ATX PS2 Power Supply |
| Dimensions | 21.0" x 19.0" x 5.25" |
| Lähetyspaino | 14.74 kg |
| Pakkauksen mitat | 635 × 533 × 254 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The chassis provides ten 3.5-inch hot-swap bays; the backplane is a passive connector board with no moving parts, so no scheduled maintenance is needed beyond keeping the bay area free of dust.
The 21.0-inch depth allows most full-length cards, but the ATX power-supply position at the rear may reduce usable length for the slot closest to it.
The unit ships without fans; thermal performance and noise depend entirely on the ATX PS2 supply and any case fans you add, so plan airflow to match your drive count.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?