暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 4U rackmount server chassis with ten 3.5-inch hot-swap drive bays

iStarUSA Inc.

iStarUSA Inc. D-416-B10SA-SLV-SLV 4U Rackmount Server Chassis 10x3.5

SKU CH-33E3-9875Y MPN D-416-B10SA-SLV-SLV

A 4U rackmount server chassis with ten hot-swap 3.5-inch drive bays, ATX motherboard support and seven expansion slots

  • Chassis TypeRackmount
  • Form Factor4U
  • Case MaterialMetal/ Aluminum
  • Motherboard CompatibilityATX
  • Hot-Swap Drive Bays10 x 3.5"
  • Expansion Slots7

Model D-416-B10SA-SLV-SLV

  • Ten hot-swap 3.5" bays give high-density storage
  • 4U rackmount form factor fits standard server racks
  • Metal and aluminium construction provides sturdy enclosure
  • ATX motherboard support enables flexible system builds
  • Seven expansion slots allow multiple add-in cards

4U Rackmount Chassis with Ten Hot-Swap Bays

The iStarUSA D-416-B10SA-SLV-SLV is a 4U rackmount server chassis built from metal and aluminium. It accepts ATX motherboards and provides ten front-accessible 3.5" hot-swap drive bays for high-density storage. Seven expansion slots support additional controller or network cards. A front panel includes two USB 2.0 connectors, power and HDD LEDs, plus power and reset switches.

Storage-Focused Builds Not Suited for Compact Racks

This chassis suits administrators who need many drive bays in a standard 4U height and who plan to use an ATX power supply. Builders requiring 2.5" bay density, tool-less drive trays, or a shorter depth for shallow racks should consider other form factors. The design also assumes PS2-style ATX power supplies rather than redundant or hot-swap units.

Ten 3.5-Inch Hot-Swap Drive Bays Define Capacity

The single specification that determines fit is the ten 3.5" hot-swap bays, which set the maximum number of mechanical drives the system can hold. Verify that your backplane, controllers, and cabling match this bay count before purchase.

特長

  • Ten hot-swap 3.5" bays give high-density storage
  • 4U rackmount form factor fits standard server racks
  • Metal and aluminium construction provides sturdy enclosure
  • ATX motherboard support enables flexible system builds
  • Seven expansion slots allow multiple add-in cards

仕様

BrandiStarUSA
ModelD-416-B10SA-SLV-SLIVER
Chassis TypeRackmount
Form Factor4U
Case MaterialMetal/ Aluminum
Motherboard CompatibilityATX
Hot-Swap Drive Bays10 x 3.5"
Expansion Slots7
Front PortsFront USB 2.0 x 2 Connector
FeaturesPower and HDD LED
Power and Reset Switch
Support ATX PS2 Power Supply
Dimensions21.0" x 19.0" x 5.25"
配送重量14.74 kg
梱包サイズ635 × 533 × 254 mm

このモデルの他のバージョン

同シリーズにさらに 2点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the ten 3.5-inch hot-swap drive bays require any backplane maintenance over time?

The chassis provides ten 3.5-inch hot-swap bays; the backplane is a passive connector board with no moving parts, so no scheduled maintenance is needed beyond keeping the bay area free of dust.

What limits how many full-length expansion cards I can install in the seven slots?

The 21.0-inch depth allows most full-length cards, but the ATX power-supply position at the rear may reduce usable length for the slot closest to it.

How much heat and noise should I expect when the chassis runs continuously with all bays populated?

The unit ships without fans; thermal performance and noise depend entirely on the ATX PS2 supply and any case fans you add, so plan airflow to match your drive count.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。