نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

iStarUSA Inc.

iStarUSA Inc. D-416-B10SA-SLV-SLV 4U Rackmount Server Chassis 10x3.5

SKU CH-33E3-9875Y MPN D-416-B10SA-SLV-SLV

A 4U rackmount server chassis with ten hot-swap 3.5-inch drive bays, ATX motherboard support and seven expansion slots

  • Chassis TypeRackmount
  • Form Factor4U
  • Case MaterialMetal/ Aluminum
  • Motherboard CompatibilityATX
  • Hot-Swap Drive Bays10 x 3.5"
  • Expansion Slots7

Model D-416-B10SA-SLV-SLV

  • Ten hot-swap 3.5" bays give high-density storage
  • 4U rackmount form factor fits standard server racks
  • Metal and aluminium construction provides sturdy enclosure
  • ATX motherboard support enables flexible system builds
  • Seven expansion slots allow multiple add-in cards

4U Rackmount Chassis with Ten Hot-Swap Bays

The iStarUSA D-416-B10SA-SLV-SLV is a 4U rackmount server chassis built from metal and aluminium. It accepts ATX motherboards and provides ten front-accessible 3.5" hot-swap drive bays for high-density storage. Seven expansion slots support additional controller or network cards. A front panel includes two USB 2.0 connectors, power and HDD LEDs, plus power and reset switches.

Storage-Focused Builds Not Suited for Compact Racks

This chassis suits administrators who need many drive bays in a standard 4U height and who plan to use an ATX power supply. Builders requiring 2.5" bay density, tool-less drive trays, or a shorter depth for shallow racks should consider other form factors. The design also assumes PS2-style ATX power supplies rather than redundant or hot-swap units.

Ten 3.5-Inch Hot-Swap Drive Bays Define Capacity

The single specification that determines fit is the ten 3.5" hot-swap bays, which set the maximum number of mechanical drives the system can hold. Verify that your backplane, controllers, and cabling match this bay count before purchase.

أبرز المميزات

  • Ten hot-swap 3.5" bays give high-density storage
  • 4U rackmount form factor fits standard server racks
  • Metal and aluminium construction provides sturdy enclosure
  • ATX motherboard support enables flexible system builds
  • Seven expansion slots allow multiple add-in cards

المواصفات

BrandiStarUSA
ModelD-416-B10SA-SLV-SLIVER
Chassis TypeRackmount
Form Factor4U
Case MaterialMetal/ Aluminum
Motherboard CompatibilityATX
Hot-Swap Drive Bays10 x 3.5"
Expansion Slots7
Front PortsFront USB 2.0 x 2 Connector
FeaturesPower and HDD LED
Power and Reset Switch
Support ATX PS2 Power Supply
Dimensions21.0" x 19.0" x 5.25"
وزن الشحنة14.74 kg
أبعاد الطرد635 × 533 × 254 mm

إصدارات أخرى من هذا الطراز

2 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Will the ten 3.5-inch hot-swap drive bays require any backplane maintenance over time?

The chassis provides ten 3.5-inch hot-swap bays; the backplane is a passive connector board with no moving parts, so no scheduled maintenance is needed beyond keeping the bay area free of dust.

What limits how many full-length expansion cards I can install in the seven slots?

The 21.0-inch depth allows most full-length cards, but the ATX power-supply position at the rear may reduce usable length for the slot closest to it.

How much heat and noise should I expect when the chassis runs continuously with all bays populated?

The unit ships without fans; thermal performance and noise depend entirely on the ATX PS2 supply and any case fans you add, so plan airflow to match your drive count.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.