iStarUSA Inc. D-416-B10SA-BL-BLUE 4U server chassis 10 x 3.5" bays
- Rackmount
- 4U
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
iStarUSA Inc.
A 4U rackmount server chassis with ten hot-swap 3.5-inch drive bays, ATX motherboard support and seven expansion slots
Model D-416-B10SA-SLV-SLV
The iStarUSA D-416-B10SA-SLV-SLV is a 4U rackmount server chassis built from metal and aluminium. It accepts ATX motherboards and provides ten front-accessible 3.5" hot-swap drive bays for high-density storage. Seven expansion slots support additional controller or network cards. A front panel includes two USB 2.0 connectors, power and HDD LEDs, plus power and reset switches.
This chassis suits administrators who need many drive bays in a standard 4U height and who plan to use an ATX power supply. Builders requiring 2.5" bay density, tool-less drive trays, or a shorter depth for shallow racks should consider other form factors. The design also assumes PS2-style ATX power supplies rather than redundant or hot-swap units.
The single specification that determines fit is the ten 3.5" hot-swap bays, which set the maximum number of mechanical drives the system can hold. Verify that your backplane, controllers, and cabling match this bay count before purchase.
| Brand | iStarUSA |
|---|---|
| Model | D-416-B10SA-SLV-SLIVER |
| Chassis Type | Rackmount |
| Form Factor | 4U |
| Case Material | Metal/ Aluminum |
| Motherboard Compatibility | ATX |
| Hot-Swap Drive Bays | 10 x 3.5" |
| Expansion Slots | 7 |
| Front Ports | Front USB 2.0 x 2 Connector |
| Features | Power and HDD LED Power and Reset Switch Support ATX PS2 Power Supply |
| Dimensions | 21.0" x 19.0" x 5.25" |
| Prepravná hmotnosť | 14.74 kg |
| Rozmery balenia | 635 × 533 × 254 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The chassis provides ten 3.5-inch hot-swap bays; the backplane is a passive connector board with no moving parts, so no scheduled maintenance is needed beyond keeping the bay area free of dust.
The 21.0-inch depth allows most full-length cards, but the ATX power-supply position at the rear may reduce usable length for the slot closest to it.
The unit ships without fans; thermal performance and noise depend entirely on the ATX PS2 supply and any case fans you add, so plan airflow to match your drive count.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?