Kripto para kabul ediyoruz — böylece elinizdeki koinlerle gerçek donanım alabilirsiniz.Kripto parayla ödeyin, onu gerçek donanıma harcayın. $399 üzeri siparişlerde dünya genelinde sigortalı kargo ücretsizdir. Sade, markasız koliler Almanya’dan gönderilir.$399 üzeri siparişlerde sigortalı kargo ücretsizdir. Ödeme sayfası açıldığında kurunuz 30 dakika kilitli kalır.Kur 30 dakika kilitli. Her ürün mühürlüdür, seri numarası kontrol edilir ve 24 ay garanti kapsamındadır.Mühürlü, 24 ay garantili.

Favori ürünler Giriş yap
Black 92×92×38 mm square case fan with three-wire connector

Zyvpee

Zyvpee TA350DC M35105-58 92×92×38mm 12V 1.8A 3-wire case fan

SKU CH-DQ9A-51FMD

A 92 mm square case fan with ball bearing and 3-wire 12 V 1.8 A power for server or Dell 450 and 650 cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • 92 mm square frame fits tight server chassis
  • Ball bearing motor runs at 12 V 1.8 A for steady airflow
  • Three-wire DC connection gives simple speed monitoring
  • 38 mm thick profile suits DELL 450 and 650 platforms
  • NIDEC 9238 TA350DC build rated for continuous operation

Zyvpee TA350DC M35105-58 92 mm square case fan

This Zyvpee TA350DC M35105-58 is a 92×92×38 mm square case fan built around a NIDEC 9238 motor. It runs on 12 V and draws 1.8 A through a three-wire power connector. The ball-bearing design and black, non-LED frame suit general chassis airflow and DELL 450 or 650 system cooling.

Suits builds needing a 92 mm DC fan

The fan fits any case or server tray that accepts a 92 mm square frame and a three-wire DC connection. It is not for systems that require a four-wire PWM header, a different mounting pattern, or a larger frame size. Buyers who need RGB illumination or a thinner profile should look elsewhere.

92×92×38 mm frame with three-wire DC power

The critical specification is the 92 mm square footprint combined with a 38 mm thickness and a three-wire 12 V connector. Verify that your chassis or replacement slot matches these exact dimensions and the three-wire interface before purchase.

Öne çıkanlar

  • 92 mm square frame fits tight server chassis
  • Ball bearing motor runs at 12 V 1.8 A for steady airflow
  • Three-wire DC connection gives simple speed monitoring
  • 38 mm thick profile suits DELL 450 and 650 platforms
  • NIDEC 9238 TA350DC build rated for continuous operation

Teknik özellikler

SeriesTA350DC
ModelM35105-58 G5DELP6
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions92*92*38mm

Bu ürünle ilgili sorular

Will the 92×92×38 mm frame and 3-wire connector fit the same mounting holes and header as my current 92 mm fan?

The fan uses a 92 mm square frame that is 38 mm thick with a standard 3-wire power connector, so it matches the screw pattern and header used by most 92 mm case fans.

How can I confirm the ball-bearing TA350DC is spinning at the correct speed after installation?

Connect the 3-wire lead to a motherboard or fan controller header, then monitor the RPM reading in BIOS or hardware-monitoring software while the system is running.

Does the box include mounting screws or a 3-to-4-pin adapter, or must I buy them separately?

The package contains the TA350DC M35105-58 fan unit only; mounting screws and any pin adapters are not included and must be sourced separately.

Bu reyondan diğerleri

Müşteriler bunları karşılaştırdı

Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.