Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Black 92×92×38 mm square case fan with three-wire connector

Zyvpee

Zyvpee TA350DC M35105-58 92×92×38mm 12V 1.8A 3-wire case fan

SKU CH-DQ9A-51FMD

A 92 mm square case fan with ball bearing and 3-wire 12 V 1.8 A power for server or Dell 450 and 650 cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • 92 mm square frame fits tight server chassis
  • Ball bearing motor runs at 12 V 1.8 A for steady airflow
  • Three-wire DC connection gives simple speed monitoring
  • 38 mm thick profile suits DELL 450 and 650 platforms
  • NIDEC 9238 TA350DC build rated for continuous operation

Zyvpee TA350DC M35105-58 92 mm square case fan

This Zyvpee TA350DC M35105-58 is a 92×92×38 mm square case fan built around a NIDEC 9238 motor. It runs on 12 V and draws 1.8 A through a three-wire power connector. The ball-bearing design and black, non-LED frame suit general chassis airflow and DELL 450 or 650 system cooling.

Suits builds needing a 92 mm DC fan

The fan fits any case or server tray that accepts a 92 mm square frame and a three-wire DC connection. It is not for systems that require a four-wire PWM header, a different mounting pattern, or a larger frame size. Buyers who need RGB illumination or a thinner profile should look elsewhere.

92×92×38 mm frame with three-wire DC power

The critical specification is the 92 mm square footprint combined with a 38 mm thickness and a three-wire 12 V connector. Verify that your chassis or replacement slot matches these exact dimensions and the three-wire interface before purchase.

Pontos fortes

  • 92 mm square frame fits tight server chassis
  • Ball bearing motor runs at 12 V 1.8 A for steady airflow
  • Three-wire DC connection gives simple speed monitoring
  • 38 mm thick profile suits DELL 450 and 650 platforms
  • NIDEC 9238 TA350DC build rated for continuous operation

Especificações

SeriesTA350DC
ModelM35105-58 G5DELP6
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions92*92*38mm

Perguntas sobre este artigo

Will the 92×92×38 mm frame and 3-wire connector fit the same mounting holes and header as my current 92 mm fan?

The fan uses a 92 mm square frame that is 38 mm thick with a standard 3-wire power connector, so it matches the screw pattern and header used by most 92 mm case fans.

How can I confirm the ball-bearing TA350DC is spinning at the correct speed after installation?

Connect the 3-wire lead to a motherboard or fan controller header, then monitor the RPM reading in BIOS or hardware-monitoring software while the system is running.

Does the box include mounting screws or a 3-to-4-pin adapter, or must I buy them separately?

The package contains the TA350DC M35105-58 fan unit only; mounting screws and any pin adapters are not included and must be sourced separately.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.