Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 92×92×38 mm square case fan with three-wire connector

Zyvpee

Zyvpee TA350DC M35105-58 92×92×38mm 12V 1.8A 3-wire case fan

SKU CH-DQ9A-51FMD

A 92 mm square case fan with ball bearing and 3-wire 12 V 1.8 A power for server or Dell 450 and 650 cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Wires
  • ColorBlack
  • LEDNon-LED
  • 92 mm square frame fits tight server chassis
  • Ball bearing motor runs at 12 V 1.8 A for steady airflow
  • Three-wire DC connection gives simple speed monitoring
  • 38 mm thick profile suits DELL 450 and 650 platforms
  • NIDEC 9238 TA350DC build rated for continuous operation

Zyvpee TA350DC M35105-58 92 mm square case fan

This Zyvpee TA350DC M35105-58 is a 92×92×38 mm square case fan built around a NIDEC 9238 motor. It runs on 12 V and draws 1.8 A through a three-wire power connector. The ball-bearing design and black, non-LED frame suit general chassis airflow and DELL 450 or 650 system cooling.

Suits builds needing a 92 mm DC fan

The fan fits any case or server tray that accepts a 92 mm square frame and a three-wire DC connection. It is not for systems that require a four-wire PWM header, a different mounting pattern, or a larger frame size. Buyers who need RGB illumination or a thinner profile should look elsewhere.

92×92×38 mm frame with three-wire DC power

The critical specification is the 92 mm square footprint combined with a 38 mm thickness and a three-wire 12 V connector. Verify that your chassis or replacement slot matches these exact dimensions and the three-wire interface before purchase.

Kohokohdat

  • 92 mm square frame fits tight server chassis
  • Ball bearing motor runs at 12 V 1.8 A for steady airflow
  • Three-wire DC connection gives simple speed monitoring
  • 38 mm thick profile suits DELL 450 and 650 platforms
  • NIDEC 9238 TA350DC build rated for continuous operation

Tekniset tiedot

SeriesTA350DC
ModelM35105-58 G5DELP6
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions92*92*38mm

Kysymyksiä tästä tuotteesta

Will the 92×92×38 mm frame and 3-wire connector fit the same mounting holes and header as my current 92 mm fan?

The fan uses a 92 mm square frame that is 38 mm thick with a standard 3-wire power connector, so it matches the screw pattern and header used by most 92 mm case fans.

How can I confirm the ball-bearing TA350DC is spinning at the correct speed after installation?

Connect the 3-wire lead to a motherboard or fan controller header, then monitor the RPM reading in BIOS or hardware-monitoring software while the system is running.

Does the box include mounting screws or a 3-to-4-pin adapter, or must I buy them separately?

The package contains the TA350DC M35105-58 fan unit only; mounting screws and any pin adapters are not included and must be sourced separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.