Zyvpee
Zyvpee TA350DC M35105-58 92×92×38mm 12V 1.8A 3-wire case fan
A 92 mm square case fan with ball bearing and 3-wire 12 V 1.8 A power for server or Dell 450 and 650 cooling
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector3 Wires
- ColorBlack
- LEDNon-LED
- 92 mm square frame fits tight server chassis
- Ball bearing motor runs at 12 V 1.8 A for steady airflow
- Three-wire DC connection gives simple speed monitoring
- 38 mm thick profile suits DELL 450 and 650 platforms
- NIDEC 9238 TA350DC build rated for continuous operation
Zyvpee TA350DC M35105-58 92 mm square case fan
This Zyvpee TA350DC M35105-58 is a 92×92×38 mm square case fan built around a NIDEC 9238 motor. It runs on 12 V and draws 1.8 A through a three-wire power connector. The ball-bearing design and black, non-LED frame suit general chassis airflow and DELL 450 or 650 system cooling.
Suits builds needing a 92 mm DC fan
The fan fits any case or server tray that accepts a 92 mm square frame and a three-wire DC connection. It is not for systems that require a four-wire PWM header, a different mounting pattern, or a larger frame size. Buyers who need RGB illumination or a thinner profile should look elsewhere.
92×92×38 mm frame with three-wire DC power
The critical specification is the 92 mm square footprint combined with a 38 mm thickness and a three-wire 12 V connector. Verify that your chassis or replacement slot matches these exact dimensions and the three-wire interface before purchase.
주요 특징
- 92 mm square frame fits tight server chassis
- Ball bearing motor runs at 12 V 1.8 A for steady airflow
- Three-wire DC connection gives simple speed monitoring
- 38 mm thick profile suits DELL 450 and 650 platforms
- NIDEC 9238 TA350DC build rated for continuous operation
사양
| Series | TA350DC |
|---|---|
| Model | M35105-58 G5DELP6 |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 3 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 92*92*38mm |
이 상품에 대한 질문
Will the 92×92×38 mm frame and 3-wire connector fit the same mounting holes and header as my current 92 mm fan?
The fan uses a 92 mm square frame that is 38 mm thick with a standard 3-wire power connector, so it matches the screw pattern and header used by most 92 mm case fans.
How can I confirm the ball-bearing TA350DC is spinning at the correct speed after installation?
Connect the 3-wire lead to a motherboard or fan controller header, then monitor the RPM reading in BIOS or hardware-monitoring software while the system is running.
Does the box include mounting screws or a 3-to-4-pin adapter, or must I buy them separately?
The package contains the TA350DC M35105-58 fan unit only; mounting screws and any pin adapters are not included and must be sourced separately.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001054BTC
재고 있음