Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.

Проследени артикули Вход
Brass 90-degree dual rotary fitting with male and female G 1/4 threads

PrimoChill

PrimoChill G 1/4in 90 Degree SX Dual Rotary Snake Fitting diy cooling

SKU CH-AR38-TADYC

A 90 degree dual rotary elbow fitting redirects custom-loop tubing at unconventional angles with adjustable alignment

  • TypeCPU Block

Option UV Green

Вижте още 10 конфигурации

Зачертаните версии съществуват, но не се предлагат тук.

  • Quick direction changes in tight loops
  • 90-degree elbow redirects tubing away from components
  • Dual rotary joints align runs without extra bends
  • Coated brass construction resists corrosion
  • Powder-coated finish delivers consistent colour

Quick Loop Direction Change

The PrimoChill G 1/4in 90 Degree SX Dual Rotary Snake Fitting redirects custom water-cooling loops around tight component layouts. It connects a male G 1/4in thread to a female G 1/4in thread, providing an immediate 90 degree turn without forcing tubing into sharp bends. Builders use it when standard elbows cannot clear motherboard heatsinks or GPU backplates.

Coated Brass With Dual Rotary Joints

The body is machined from coated brass and powder-coated for a consistent colour finish. Two independent rotary joints allow each end to spin freely, so the outlet can be aimed precisely after the fitting is tightened. An O-ring comes pre-installed on the male thread to seal against the mating port. The supplier warns that rotary joints can occasionally dislodge if knocked; reseating the joints and pressure-testing usually restores the seal.

Replaces Fixed Elbows In Cramped Builds

This fitting replaces rigid 90 degree elbows when tubing must exit a block at an unusual angle or clear adjacent hardware. The jump is worth it when a fixed elbow forces a kink or blocks access to a neighbouring port. It is not suited for loops that will see frequent physical movement or vibration, since the rotary mechanism adds potential leak paths compared with a solid elbow.

Акценти

  • Quick direction changes in tight loops
  • 90-degree elbow redirects tubing away from components
  • Dual rotary joints align runs without extra bends
  • Coated brass construction resists corrosion
  • Powder-coated finish delivers consistent colour

Спецификации

TypeCPU Block

Други версии на този модел

5 още от същата серия

Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.

Въпроси за този артикул

What thread standard does the G 1/4in dual rotary fitting use?

It uses male and female G 1/4in threads, the common standard for custom water-cooling components

What clearance does the 90 degree SX dual rotary elbow need?

The 90 degree SX shape projects sideways from the port; allow room for the elbow body and the two rotary joints to turn freely

How is the PrimoChill rotary elbow installed and what step is often missed?

Screw the male thread into the component port using the pre-installed O-ring, then tighten both rotary collars to lock the angle you set

Още от този рафт

Често сравнявани заедно

Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.