Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Brass 90-degree dual rotary fitting with male and female G 1/4 threads

PrimoChill

PrimoChill G 1/4in 90 Degree SX Dual Rotary Snake Fitting diy cooling

SKU CH-AR38-TADYC

A 90 degree dual rotary elbow fitting redirects custom-loop tubing at unconventional angles with adjustable alignment

  • TypeCPU Block

Option UV Green

Vedeți celelalte 10 configurații

Versiunile tăiate există, dar nu sunt disponibile aici.

  • Quick direction changes in tight loops
  • 90-degree elbow redirects tubing away from components
  • Dual rotary joints align runs without extra bends
  • Coated brass construction resists corrosion
  • Powder-coated finish delivers consistent colour

Quick Loop Direction Change

The PrimoChill G 1/4in 90 Degree SX Dual Rotary Snake Fitting redirects custom water-cooling loops around tight component layouts. It connects a male G 1/4in thread to a female G 1/4in thread, providing an immediate 90 degree turn without forcing tubing into sharp bends. Builders use it when standard elbows cannot clear motherboard heatsinks or GPU backplates.

Coated Brass With Dual Rotary Joints

The body is machined from coated brass and powder-coated for a consistent colour finish. Two independent rotary joints allow each end to spin freely, so the outlet can be aimed precisely after the fitting is tightened. An O-ring comes pre-installed on the male thread to seal against the mating port. The supplier warns that rotary joints can occasionally dislodge if knocked; reseating the joints and pressure-testing usually restores the seal.

Replaces Fixed Elbows In Cramped Builds

This fitting replaces rigid 90 degree elbows when tubing must exit a block at an unusual angle or clear adjacent hardware. The jump is worth it when a fixed elbow forces a kink or blocks access to a neighbouring port. It is not suited for loops that will see frequent physical movement or vibration, since the rotary mechanism adds potential leak paths compared with a solid elbow.

Puncte forte

  • Quick direction changes in tight loops
  • 90-degree elbow redirects tubing away from components
  • Dual rotary joints align runs without extra bends
  • Coated brass construction resists corrosion
  • Powder-coated finish delivers consistent colour

Specificații

TypeCPU Block

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What thread standard does the G 1/4in dual rotary fitting use?

It uses male and female G 1/4in threads, the common standard for custom water-cooling components

What clearance does the 90 degree SX dual rotary elbow need?

The 90 degree SX shape projects sideways from the port; allow room for the elbow body and the two rotary joints to turn freely

How is the PrimoChill rotary elbow installed and what step is often missed?

Screw the male thread into the component port using the pre-installed O-ring, then tighten both rotary collars to lock the angle you set

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.