Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Brass 90-degree dual rotary fitting with male and female G 1/4 threads

PrimoChill

PrimoChill G 1/4in 90 Degree SX Dual Rotary Snake Fitting diy cooling

SKU CH-AR38-TADYC

A 90 degree dual rotary elbow fitting redirects custom-loop tubing at unconventional angles with adjustable alignment

  • TypeCPU Block

Option UV Green

Zobrazit dalších 10 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Quick direction changes in tight loops
  • 90-degree elbow redirects tubing away from components
  • Dual rotary joints align runs without extra bends
  • Coated brass construction resists corrosion
  • Powder-coated finish delivers consistent colour

Quick Loop Direction Change

The PrimoChill G 1/4in 90 Degree SX Dual Rotary Snake Fitting redirects custom water-cooling loops around tight component layouts. It connects a male G 1/4in thread to a female G 1/4in thread, providing an immediate 90 degree turn without forcing tubing into sharp bends. Builders use it when standard elbows cannot clear motherboard heatsinks or GPU backplates.

Coated Brass With Dual Rotary Joints

The body is machined from coated brass and powder-coated for a consistent colour finish. Two independent rotary joints allow each end to spin freely, so the outlet can be aimed precisely after the fitting is tightened. An O-ring comes pre-installed on the male thread to seal against the mating port. The supplier warns that rotary joints can occasionally dislodge if knocked; reseating the joints and pressure-testing usually restores the seal.

Replaces Fixed Elbows In Cramped Builds

This fitting replaces rigid 90 degree elbows when tubing must exit a block at an unusual angle or clear adjacent hardware. The jump is worth it when a fixed elbow forces a kink or blocks access to a neighbouring port. It is not suited for loops that will see frequent physical movement or vibration, since the rotary mechanism adds potential leak paths compared with a solid elbow.

Přednosti

  • Quick direction changes in tight loops
  • 90-degree elbow redirects tubing away from components
  • Dual rotary joints align runs without extra bends
  • Coated brass construction resists corrosion
  • Powder-coated finish delivers consistent colour

Specifikace

TypeCPU Block

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What thread standard does the G 1/4in dual rotary fitting use?

It uses male and female G 1/4in threads, the common standard for custom water-cooling components

What clearance does the 90 degree SX dual rotary elbow need?

The 90 degree SX shape projects sideways from the port; allow room for the elbow body and the two rotary joints to turn freely

How is the PrimoChill rotary elbow installed and what step is often missed?

Screw the male thread into the component port using the pre-installed O-ring, then tighten both rotary collars to lock the angle you set

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.