Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small brass G 1/4 pressure check valve 16.53mm diameter

PrimoChill

PrimoChill SX Pressure Check Valve G 1/4 16.53mm

SKU CH-KP69-WH0A7

A G 1/4 stop fitting that vents trapped air and eases loop priming, with a 16.53 mm diameter

  • TypeCPU Block

Option Dark Nickel

Zobrazit dalších 10 konfigurací

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Releases trapped air to prevent pressure build-up
  • G 1/4 thread fits standard water-cooling fittings
  • 53 mm overall diameter for compact installations
  • Installs in seconds without specialised tools
  • Helps eliminate air locks and simplifies loop priming

PrimoChill SX Pressure Check Valve

The PrimoChill SX Pressure Check Valve is a G 1/4 threaded stop fitting designed for custom water-cooling loops. It targets builders who need a reliable way to vent trapped air from the highest point of a reservoir or radiator. The valve activates automatically when internal pressure accumulates, releasing air to prevent air locks. This component suits enthusiasts assembling or maintaining open-loop liquid cooling systems.

Function and Installation Impact

The valve eliminates the need for manual bleeding cycles by venting air whenever pressure rises, which simplifies the initial priming process. Installation requires only seconds thanks to the industry-standard G 1/4 threads and 16.53mm overall diameter. A pre-set mechanism means no user adjustment is necessary before fitting it into the loop. The package includes a single valve ready for immediate integration.

Operational Limits and Precautions

Fluid can escape alongside air if no air pocket exists beneath the valve when pressure builds, so sensitive components must not sit directly below the installation point. Over-tightening the G 1/4 threads risks stripping them and compromising the seal. The manufacturer accepts no liability for hardware damage resulting from use, placing responsibility on the installer to position and torque the fitting correctly.

Přednosti

  • Releases trapped air to prevent pressure build-up
  • G 1/4 thread fits standard water-cooling fittings
  • 53 mm overall diameter for compact installations
  • Installs in seconds without specialised tools
  • Helps eliminate air locks and simplifies loop priming

Specifikace

TypeCPU Block

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the G 1/4 thread on this valve need any sealant or scheduled replacement?

The valve uses a standard G 1/4 thread that seals with the included O-ring; no extra sealant is required and the fitting itself has no service interval.

What pressure level makes the valve open and vent fluid instead of just air?

The valve is pre-set to open when loop pressure exceeds its internal spring rating, releasing either air or coolant if no air pocket remains below the fitting.

Will the brass body add noticeable heat to the loop during continuous operation?

The fitting is a passive brass component with 16.53 mm diameter; it adds no active heat and its thermal mass is negligible in a running loop.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.