STARTECH ADJDINKIT 2U Adjustable DIN Rail Kit 19in server accessory
- Rail Kit
- U Height: 2U Frame…
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Rosewill
Converts three 5.25-inch bays into four hot-swap trays for 3.5-inch or 2.5-inch SATA and SAS drives with a rear 120mm exhaust fan
Model RSV-SATA-Cage-34
Зачертаните версии съществуват, но не се предлагат тук.
The Rosewill RSV-SATA-Cage-34 converts three 5.25-inch drive bays into four hot-swap trays for 3.5-inch or 2.5-inch SATA and SAS hard drives. It targets server builders who need dense storage in a standard chassis. The steel and ABS construction is built for continuous operation. Compatible Rosewill chassis include the L4000U, L4500U and R4000U models.
Mount the unit into three adjacent 5.25-inch bays using the supplied screws and connect the single 120mm exhaust fan to a motherboard or fan controller header. Hot-swap requires the motherboard BIOS to be set to AHCI mode and each drive formatted under AHCI; without this the tray eject function will not work. Drive trays slide in from the front and lock with a key mechanism.
The cage passes SATA I, II and III signals and supports SAS at 6 Gbps only; faster SAS speeds are not supported. Bandwidth per drive depends on the host controller and the drive itself. The single rear fan provides baseline airflow but may be insufficient for four high-RPM enterprise drives under sustained load. No active backplane electronics are included.
| Brand | Rosewill |
|---|---|
| Model | RSV-SATA-Cage-34 |
| Type | Hard Disk Drive Cage |
| Specifications | Occupancy: 3 x 5.25" Drive Bays Capacity: 4 x SATA 3.5" HDD or 4 x SATA 2.5" HDD or SAS HDD Supports Hot-Swap: SATA I / II / III Cooling Subsystem: 1 x 120mm Exhaust Fan Material: Steel & ABS Dimension: 5.87" x 5.02" x 8.27" Weight: 2.65 lbs. |
| Тегло на пратката | 1.83 kg |
| Размери на опаковката | 287 × 211 × 196 mm |
The 120mm rear exhaust fan spins when the cage receives power; you should hear and feel airflow from the back of the unit once the system is on.
The package includes the cage, four hot-swap trays, mounting screws and a fan power cable; you must provide the 3.5" or 2.5" SATA or SAS drives and a motherboard with AHCI-enabled SATA ports.
It is compatible with Rosewill L4000U, L4500U and R4000U chassis.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Няма съвпадащ език.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?