เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Rosewill

Rosewill RSV-SATA-Cage-34 Server Accessory 3x5.25" to 4x3.5" Hot-Swap SATA SAS 120mm Fan

SKU CH-BS1T-KWE4P MPN RSV-SATA-Cage-34

Converts three 5.25-inch bays into four hot-swap trays for 3.5-inch or 2.5-inch SATA and SAS drives with a rear 120mm exhaust fan

  • TypeHard Disk Drive Cage
  • SpecificationsOccupancy: 3 x 5.25" Drive Bays Capacity: 4 x SATA 3.5" HDD

Model RSV-SATA-Cage-34

  • RASA-11001
  • RSV-SATA-Cage-34

ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่

  • Converts three 5.25" bays into four 3.5" or 2.5" drive slots
  • Hot-swap SATA and SAS trays let you change drives without powering down
  • Rear 120 mm exhaust fan pulls heat away from installed drives
  • Steel and ABS construction resists wear in continuous server use
  • Fits Rosewill L4000U, L4500U and R4000U chassis for direct integration

What this cage does

The Rosewill RSV-SATA-Cage-34 converts three 5.25-inch drive bays into four hot-swap trays for 3.5-inch or 2.5-inch SATA and SAS hard drives. It targets server builders who need dense storage in a standard chassis. The steel and ABS construction is built for continuous operation. Compatible Rosewill chassis include the L4000U, L4500U and R4000U models.

Installation notes

Mount the unit into three adjacent 5.25-inch bays using the supplied screws and connect the single 120mm exhaust fan to a motherboard or fan controller header. Hot-swap requires the motherboard BIOS to be set to AHCI mode and each drive formatted under AHCI; without this the tray eject function will not work. Drive trays slide in from the front and lock with a key mechanism.

SATA and SAS limits

The cage passes SATA I, II and III signals and supports SAS at 6 Gbps only; faster SAS speeds are not supported. Bandwidth per drive depends on the host controller and the drive itself. The single rear fan provides baseline airflow but may be insufficient for four high-RPM enterprise drives under sustained load. No active backplane electronics are included.

จุดเด่น

  • Converts three 5.25" bays into four 3.5" or 2.5" drive slots
  • Hot-swap SATA and SAS trays let you change drives without powering down
  • Rear 120 mm exhaust fan pulls heat away from installed drives
  • Steel and ABS construction resists wear in continuous server use
  • Fits Rosewill L4000U, L4500U and R4000U chassis for direct integration

ข้อมูลจำเพาะ

BrandRosewill
ModelRSV-SATA-Cage-34
TypeHard Disk Drive Cage
SpecificationsOccupancy: 3 x 5.25" Drive Bays
Capacity: 4 x SATA 3.5" HDD or 4 x SATA 2.5" HDD or SAS HDD
Supports Hot-Swap: SATA I / II / III
Cooling Subsystem: 1 x 120mm Exhaust Fan
Material: Steel & ABS
Dimension: 5.87" x 5.02" x 8.27"
Weight: 2.65 lbs.
น้ำหนักในการจัดส่ง1.83 kg
ขนาดบรรจุภัณฑ์287 × 211 × 196 mm

คำถามเกี่ยวกับสินค้านี้

How do I confirm the 120mm exhaust fan is running after I install the cage?

The 120mm rear exhaust fan spins when the cage receives power; you should hear and feel airflow from the back of the unit once the system is on.

What comes in the box and what must I supply separately?

The package includes the cage, four hot-swap trays, mounting screws and a fan power cable; you must provide the 3.5" or 2.5" SATA or SAS drives and a motherboard with AHCI-enabled SATA ports.

Which Rosewill server chassis models does the RSV-SATA-Cage-34 fit?

It is compatible with Rosewill L4000U, L4500U and R4000U chassis.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที