Solidigm D7-PS1030 SB5PHA7E016TOF1 1.6TB E3.S 7.5mm PCIe 5.0 enterprise SSD
- E3.S 7.5mm
- 1.6TB
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Solidigm
Enterprise U.2 15mm SSD with 1.6TB of 176L TLC NAND, PCIe 5.0 x4, 14500 MB/s read, 4100 MB/s write, 3 DWPD endurance and FIPS security
Option 1.6TB U.2 FIPS
This Solidigm D7-PS1030 is a 1.6TB enterprise SSD built for data-centre workloads. It uses 176L TLC 3D NAND and a PCI-Express 5.0 interface to deliver up to 14500 MBps sequential read and 4100 MBps sequential write speeds. The drive is rated for 3 DWPD endurance with 8.7 PBW total bytes written. It suits servers needing high random read IOPS and FIPS security.
The U.2 15mm form factor fits standard hot-swap backplanes designed for this height. Installation requires a compatible U.2 connector and adequate airflow to keep the drive within its 0°C to 77°C operating range. Active power draw reaches 17W so the chassis power budget must account for that load. No special drivers are needed beyond the operating system PCIe stack.
At 1.6TB the drive handles mixed read-heavy databases, virtualisation hosts and logging tiers comfortably. The 2350000 random read IOPS and 350000 random write IOPS provide headroom for parallel workloads. Write-intensive applications exceeding 3 DWPD will wear the NAND faster than the rated 8.7 PBW. Workloads needing larger capacity or higher write endurance should consider higher-capacity models.
| Brand | Solidigm |
|---|---|
| Model | D7-PS1030 |
| Part Number | SB5PH27E016TOF1 |
| Form Factor | U.2 15mm |
| Capacity | 1.6TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 4100 MBps |
| 4KB Random Read | 2350000 IOPS (4K Blocks) |
| 4KB Random Write | 350000 IOPS (4K Blocks) |
| Endurance | 3 DWPD / 8.7 PBW |
| MTBF | 2,500,000 hours |
| Security | FIPS |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 17W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 140g +/- 10g |
| Тегло на пратката | 0.17 kg |
| Размери на опаковката | 140 × 110 × 17 mm |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
Run a sequential-read benchmark at queue depth 32 on the PCIe 5.0 x4 link and confirm sustained throughput approaches 14500 MBps with the drive temperature below 77 °C.
The single-pack box contains only the 1.6 TB U.2 15 mm drive; a compatible U.2 backplane or cable, PCIe 5.0-capable server chassis and mounting screws are not included.
This part number provides 1.6 TB with 3 DWPD and 8.7 PBW total bytes written, matching the specified endurance target.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?