Solidigm D7-PS1030 SB5PHA7E016TOF1 1.6TB E3.S 7.5mm PCIe 5.0 enterprise SSD
- E3.S 7.5mm
- 1.6TB
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
Solidigm
Enterprise U.2 15mm SSD with 1.6TB of 176L TLC NAND, PCIe 5.0 x4, 14500 MB/s read, 4100 MB/s write, 3 DWPD endurance and FIPS security
Option 1.6TB U.2 FIPS
This Solidigm D7-PS1030 is a 1.6TB enterprise SSD built for data-centre workloads. It uses 176L TLC 3D NAND and a PCI-Express 5.0 interface to deliver up to 14500 MBps sequential read and 4100 MBps sequential write speeds. The drive is rated for 3 DWPD endurance with 8.7 PBW total bytes written. It suits servers needing high random read IOPS and FIPS security.
The U.2 15mm form factor fits standard hot-swap backplanes designed for this height. Installation requires a compatible U.2 connector and adequate airflow to keep the drive within its 0°C to 77°C operating range. Active power draw reaches 17W so the chassis power budget must account for that load. No special drivers are needed beyond the operating system PCIe stack.
At 1.6TB the drive handles mixed read-heavy databases, virtualisation hosts and logging tiers comfortably. The 2350000 random read IOPS and 350000 random write IOPS provide headroom for parallel workloads. Write-intensive applications exceeding 3 DWPD will wear the NAND faster than the rated 8.7 PBW. Workloads needing larger capacity or higher write endurance should consider higher-capacity models.
| Brand | Solidigm |
|---|---|
| Model | D7-PS1030 |
| Part Number | SB5PH27E016TOF1 |
| Form Factor | U.2 15mm |
| Capacity | 1.6TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 4100 MBps |
| 4KB Random Read | 2350000 IOPS (4K Blocks) |
| 4KB Random Write | 350000 IOPS (4K Blocks) |
| Endurance | 3 DWPD / 8.7 PBW |
| MTBF | 2,500,000 hours |
| Security | FIPS |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 17W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 140g +/- 10g |
| Teža pošiljke | 0.17 kg |
| Velikost pošiljke | 140 × 110 × 17 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
Run a sequential-read benchmark at queue depth 32 on the PCIe 5.0 x4 link and confirm sustained throughput approaches 14500 MBps with the drive temperature below 77 °C.
The single-pack box contains only the 1.6 TB U.2 15 mm drive; a compatible U.2 backplane or cable, PCIe 5.0-capable server chassis and mounting screws are not included.
This part number provides 1.6 TB with 3 DWPD and 8.7 PBW total bytes written, matching the specified endurance target.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?