Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver rectangular U.2 15mm enterprise SSD with label showing capacity and model

Solidigm

Solidigm D7-PS1030 SB5PH27E016TOF1 1.6TB U.2 15mm PCIe 5.0 enterprise SSD

SKU CH-YS94-AWAKR MPN SB5PH27E016TOF1

Enterprise U.2 15mm SSD with 1.6TB of 176L TLC NAND, PCIe 5.0 x4, 14500 MB/s read, 4100 MB/s write, 3 DWPD endurance and FIPS security

  • Form FactorU.2 15mm
  • Capacity1.6TB
  • Memory Components176L TLC 3D NAND
  • InterfacePCI-Express 5.0
  • Max Sequential ReadUp to 14500 MBps
  • Max Sequential WriteUp to 4100 MBps

Option 1.6TB U.2 FIPS

Zobrazit dalších 12 konfigurací
  • High sequential read speed up to 14500 MBps via PCIe 5.0 interface
  • High random read performance of 2350000 IOPS with 176L TLC 3D NAND
  • Sustained write endurance of 3 DWPD reaching 8.7 PBW total bytes written
  • Enterprise reliability with 2500000 hours MTBF and FIPS security certification
  • Efficient 15mm U.2 form factor operating 0°C to 77°C at 17W active power

Solidigm D7-PS1030 1.6TB U.2 15mm Drive

This Solidigm D7-PS1030 is a 1.6TB enterprise SSD built for data-centre workloads. It uses 176L TLC 3D NAND and a PCI-Express 5.0 interface to deliver up to 14500 MBps sequential read and 4100 MBps sequential write speeds. The drive is rated for 3 DWPD endurance with 8.7 PBW total bytes written. It suits servers needing high random read IOPS and FIPS security.

Installation In Standard U.2 Bays

The U.2 15mm form factor fits standard hot-swap backplanes designed for this height. Installation requires a compatible U.2 connector and adequate airflow to keep the drive within its 0°C to 77°C operating range. Active power draw reaches 17W so the chassis power budget must account for that load. No special drivers are needed beyond the operating system PCIe stack.

Capacity And Endurance Limits

At 1.6TB the drive handles mixed read-heavy databases, virtualisation hosts and logging tiers comfortably. The 2350000 random read IOPS and 350000 random write IOPS provide headroom for parallel workloads. Write-intensive applications exceeding 3 DWPD will wear the NAND faster than the rated 8.7 PBW. Workloads needing larger capacity or higher write endurance should consider higher-capacity models.

Přednosti

  • High sequential read speed up to 14500 MBps via PCIe 5.0 interface
  • High random read performance of 2350000 IOPS with 176L TLC 3D NAND
  • Sustained write endurance of 3 DWPD reaching 8.7 PBW total bytes written
  • Enterprise reliability with 2500000 hours MTBF and FIPS security certification
  • Efficient 15mm U.2 form factor operating 0°C to 77°C at 17W active power

Specifikace

BrandSolidigm
ModelD7-PS1030
Part NumberSB5PH27E016TOF1
Form FactorU.2 15mm
Capacity1.6TB
Memory Components176L TLC 3D NAND
InterfacePCI-Express 5.0
Max Sequential ReadUp to 14500 MBps
Max Sequential WriteUp to 4100 MBps
4KB Random Read2350000 IOPS (4K Blocks)
4KB Random Write350000 IOPS (4K Blocks)
Endurance3 DWPD / 8.7 PBW
MTBF2,500,000 hours
SecurityFIPS
Power Consumption (Idle)5W
Power Consumption (Active)17W
Operating Temperature0°C to 77°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight140g +/- 10g
Přepravní hmotnost0.17 kg
Rozměry balení140 × 110 × 17 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I verify the D7-PS1030 is delivering its rated 14500 MBps sequential read after installation?

Run a sequential-read benchmark at queue depth 32 on the PCIe 5.0 x4 link and confirm sustained throughput approaches 14500 MBps with the drive temperature below 77 °C.

What ships with the SB5PH27E016TOF1 and what must I source separately?

The single-pack box contains only the 1.6 TB U.2 15 mm drive; a compatible U.2 backplane or cable, PCIe 5.0-capable server chassis and mounting screws are not included.

Which capacity and endurance variant of the D7-PS1030 should I select for a 3 DWPD write-heavy workload?

This part number provides 1.6 TB with 3 DWPD and 8.7 PBW total bytes written, matching the specified endurance target.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.