Thermaltake Dragon 240 Riing ARGB liquid cooler
- Liquid Cooling Syst…
- AMD TR4/FM2/FM1/AM4…
Приемаме криптовалута — така монетите, които притежавате, могат да купят истински хардуер.Платете с крипто, похарчете го за истински хардуер. Безплатна застрахована доставка по целия свят над 399 $. Неутрални кашони без марка, изпратени от Германия.Безплатна застрахована доставка над 399 $. Курсът Ви е заключен за 30 минути веднага след отварянето на касата.Курс, заключен за 30 минути. Всеки артикул е запечатан, серийният му номер е проверен, и е покрит с 24-месечна гаранция.Запечатан, 24-месечна гаранция.
Thermaltake
A 240 mm all-in-one liquid cooler with dual 120 mm ARGB PWM fans, copper cold plate and aluminium radiator for Intel LGA1700 and AMD AM4 sockets
Fan Size 2 Fan Slots (120mm)
The Thermaltake Hurricane S240 is a sealed all-in-one loop with a copper cold plate, aluminium radiator and two 120 mm ARGB PWM fans. It mounts on Intel sockets from LGA1150 through LGA1700 plus LGA2011 and LGA2066, and on AMD sockets AM2 through AM4. The 400 mm rubber tubes are sleeved for durability and the pump runs at 12 V with a 380 mA draw.
The ARGB logo block and fans synchronise with motherboard RGB software for unified effects. The cooler fits standard 240 mm radiator mounts and the PH2.0-6P plus 4-pin fan connectors work with most current headers. Systems that need a thicker radiator, larger fan diameter or a non-ARGB aesthetic will not match this unit.
The aluminium radiator measures 274 mm long, 120 mm wide and 27 mm thick, so the case must clear at least that length for a front or top mount. If the available space is shorter the cooler cannot be installed.
| Brand | Thermaltake |
|---|---|
| Series | Hurricane |
| Model | S240 |
| Type | Liquid Cooling System |
| Block Compatibility - AMD | AMD: AM4, AM3+, AM2+, AM2, FM2, FM1 |
| Block Compatibility - Intel | Intel: LGA2066, LGA2011-3, LGA2011, LGA1366, LGA 1156/1155/1151/1150/1700 |
| Block Material | Copper |
| Radiator Size | 274X120X27 mm |
| Radiator Material | Aluminum |
| Fan Size | 2 Fan Slots (120 mm) |
| Fan Dim. | 120X120X25 mm |
| Fan RPM | 500~1800RPM |
| Fan Air Flow | 45.3CFM |
| Fan Noise | 31.5dBA(MAX) |
| Fan Connector | PH2.0-6P connector; 2510-4Pin |
| Color | Black |
| LED Color | ARGB |
| Tube Dim. | Water pipe length: 400mm |
| Tube Material | rubber |
Други версии на този модел
Същото семейство, различна памет, охладител или честота — сравнете, преди да решите.
The radiator measures 274 x 120 x 27 mm and uses two 120 mm fans. Check that your chassis has a 240 mm mounting location with at least 27 mm clearance for the radiator plus fan thickness.
Plug the 2510-4Pin lead into the CPU_FAN header for pump and fan speed control; connect the PH2.0-6P cable to a 5 V ARGB header on the motherboard or a compatible controller.
The loop is factory sealed with low evaporation tubing; no scheduled top up is required. If pump noise rises or temperatures climb after several years, the unit would need full replacement.
Още от този рафт
Същият рафт, същата каса — осем монети и заключване на курса за 30 минути.
Това, което изпращате, и това, в което четете цените.
Изпратено от Вашия портфейл при поръчката
Само за визуализация — каталогът е в долари
Никоя валута не съответства.
Изберете езика, на който сайтът да Ви говори.
Нови сте тук?
Вече имате профил?
Няма автоматично нулиране: този магазин не изпраща имейли, така че няма еднократна връзка, която да поискате. Оставете адреса в профила си и той ще бъде обработен ръчно.
Заявката е приета
Нищо няма да пристигне във Вашата пощенска кутия — този магазин изобщо не изпраща имейли. Заявките се обработват ръчно.
Спомнихте си я?