Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Black 240 mm AIO liquid cooler with two 120 mm ARGB fans, copper cold plate, aluminium radiator, rubber tubes

Thermaltake

Thermaltake Hurricane S240 CL-W292-PL24SW-A liquid cooler

SKU CH-PE9E-1B4C3 MPN CL-W292-PL24SW-A

A 240 mm all-in-one liquid cooler with dual 120 mm ARGB PWM fans, copper cold plate and aluminium radiator for Intel LGA1700 and AMD AM4 sockets

  • TypeLiquid Cooling System
  • Block Compatibility - AMDAMD: AM4, AM3+, AM2+, AM2, FM2, FM1
  • Block Compatibility - IntelIntel: LGA2066, LGA2011-3, LGA2011, LGA1366, LGA 1156/1155/1
  • Block MaterialCopper
  • Radiator Size274X120X27 mm
  • Radiator MaterialAluminum

Fan Size 2 Fan Slots (120mm)

  • Copper water block accelerates heat transfer for efficient cooling
  • 240 mm aluminum radiator with dual 120 mm fans delivers 45.3 CFM airflow
  • PWM fans adjust between 500 and 1800 RPM while staying under 31.5 dBA
  • ARGB lighting on pump and fans synchronises with motherboard software
  • 400 mm rubber tubes with braided sleeving resist kinks and leaks

240 mm ARGB liquid cooler

The Thermaltake Hurricane S240 is a sealed all-in-one loop with a copper cold plate, aluminium radiator and two 120 mm ARGB PWM fans. It mounts on Intel sockets from LGA1150 through LGA1700 plus LGA2011 and LGA2066, and on AMD sockets AM2 through AM4. The 400 mm rubber tubes are sleeved for durability and the pump runs at 12 V with a 380 mA draw.

Builders who want addressable lighting

The ARGB logo block and fans synchronise with motherboard RGB software for unified effects. The cooler fits standard 240 mm radiator mounts and the PH2.0-6P plus 4-pin fan connectors work with most current headers. Systems that need a thicker radiator, larger fan diameter or a non-ARGB aesthetic will not match this unit.

274 mm radiator length

The aluminium radiator measures 274 mm long, 120 mm wide and 27 mm thick, so the case must clear at least that length for a front or top mount. If the available space is shorter the cooler cannot be installed.

Puntos fuertes

  • Copper water block accelerates heat transfer for efficient cooling
  • 240 mm aluminum radiator with dual 120 mm fans delivers 45.3 CFM airflow
  • PWM fans adjust between 500 and 1800 RPM while staying under 31.5 dBA
  • ARGB lighting on pump and fans synchronises with motherboard software
  • 400 mm rubber tubes with braided sleeving resist kinks and leaks

Especificaciones

BrandThermaltake
SeriesHurricane
ModelS240
TypeLiquid Cooling System
Block Compatibility - AMDAMD: AM4, AM3+, AM2+, AM2, FM2, FM1
Block Compatibility - IntelIntel: LGA2066, LGA2011-3, LGA2011, LGA1366, LGA 1156/1155/1151/1150/1700
Block MaterialCopper
Radiator Size274X120X27 mm
Radiator MaterialAluminum
Fan Size2 Fan Slots (120 mm)
Fan Dim.120X120X25 mm
Fan RPM500~1800RPM
Fan Air Flow45.3CFM
Fan Noise31.5dBA(MAX)
Fan ConnectorPH2.0-6P connector; 2510-4Pin
ColorBlack
LED ColorARGB
Tube Dim.Water pipe length: 400mm
Tube Materialrubber

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will the 274 mm radiator and 120 mm fans fit my case?

The radiator measures 274 x 120 x 27 mm and uses two 120 mm fans. Check that your chassis has a 240 mm mounting location with at least 27 mm clearance for the radiator plus fan thickness.

Which fan header do I use for the PH2.0-6P ARGB connector and the 2510-4Pin PWM lead?

Plug the 2510-4Pin lead into the CPU_FAN header for pump and fan speed control; connect the PH2.0-6P cable to a 5 V ARGB header on the motherboard or a compatible controller.

How often should I expect to top up or replace the coolant in this sealed loop?

The loop is factory sealed with low evaporation tubing; no scheduled top up is required. If pump noise rises or temperatures climb after several years, the unit would need full replacement.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.