Thermaltake Dragon 240 Riing ARGB liquid cooler
- Liquid Cooling Syst…
- AMD TR4/FM2/FM1/AM4…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Thermaltake
A 240 mm all-in-one liquid cooler with dual 120 mm ARGB PWM fans, copper cold plate and aluminium radiator for Intel LGA1700 and AMD AM4 sockets
Fan Size 2 Fan Slots (120mm)
The Thermaltake Hurricane S240 is a sealed all-in-one loop with a copper cold plate, aluminium radiator and two 120 mm ARGB PWM fans. It mounts on Intel sockets from LGA1150 through LGA1700 plus LGA2011 and LGA2066, and on AMD sockets AM2 through AM4. The 400 mm rubber tubes are sleeved for durability and the pump runs at 12 V with a 380 mA draw.
The ARGB logo block and fans synchronise with motherboard RGB software for unified effects. The cooler fits standard 240 mm radiator mounts and the PH2.0-6P plus 4-pin fan connectors work with most current headers. Systems that need a thicker radiator, larger fan diameter or a non-ARGB aesthetic will not match this unit.
The aluminium radiator measures 274 mm long, 120 mm wide and 27 mm thick, so the case must clear at least that length for a front or top mount. If the available space is shorter the cooler cannot be installed.
| Brand | Thermaltake |
|---|---|
| Series | Hurricane |
| Model | S240 |
| Type | Liquid Cooling System |
| Block Compatibility - AMD | AMD: AM4, AM3+, AM2+, AM2, FM2, FM1 |
| Block Compatibility - Intel | Intel: LGA2066, LGA2011-3, LGA2011, LGA1366, LGA 1156/1155/1151/1150/1700 |
| Block Material | Copper |
| Radiator Size | 274X120X27 mm |
| Radiator Material | Aluminum |
| Fan Size | 2 Fan Slots (120 mm) |
| Fan Dim. | 120X120X25 mm |
| Fan RPM | 500~1800RPM |
| Fan Air Flow | 45.3CFM |
| Fan Noise | 31.5dBA(MAX) |
| Fan Connector | PH2.0-6P connector; 2510-4Pin |
| Color | Black |
| LED Color | ARGB |
| Tube Dim. | Water pipe length: 400mm |
| Tube Material | rubber |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
The radiator measures 274 x 120 x 27 mm and uses two 120 mm fans. Check that your chassis has a 240 mm mounting location with at least 27 mm clearance for the radiator plus fan thickness.
Plug the 2510-4Pin lead into the CPU_FAN header for pump and fan speed control; connect the PH2.0-6P cable to a 5 V ARGB header on the motherboard or a compatible controller.
The loop is factory sealed with low evaporation tubing; no scheduled top up is required. If pump noise rises or temperatures climb after several years, the unit would need full replacement.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?