Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 92mm square case fan with transparent blades and thermal sensor

1ST PC CORP.

1ST PC CORP. M35172-57 92mm case fan 3500-3999 RPM 80 CFM 2 Ball 15-20 dBA

SKU CH-ZSR2-69NQZ MPN M35172-57

A 92mm case fan delivering 80 CFM airflow at 3500-3999 RPM with 15-20 dBA noise using dual ball bearings and a thermal sensor

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size92mm
  • Bearing Type2 Ball
  • RPM3500-3999 RPM
  • Air Flow80 CFM
  • Efficient 80 CFM airflow cools cases quickly
  • Quiet 15 to 20 dBA operation suits silent builds
  • Dual ball bearings extend service life
  • 92 mm size fits standard mounting points
  • Thermal sensor adjusts speed to temperature demands

92mm case fan with thermal sensor

This 92mm case fan operates between 3500 and 3999 RPM and delivers 80 CFM of airflow. It uses a 2 Ball bearing and a 3 Pin power connector. A built-in thermal sensor allows automatic speed adjustment based on temperature. The frame measures 92 x 92 x 32 mm and has a black finish with no LED lighting.

Suits builds needing a 92mm mount

The 92mm size fits cases designed for that specific mounting pattern. The 15 to 20 dBA noise range works for quiet systems. Builders requiring higher static pressure for dense radiators or larger fan mounts should consider other options. The 3 Pin connector provides voltage control but not PWM signalling.

3500-3999 RPM range determines cooling capacity

This speed band sets the maximum airflow of 80 CFM and the associated noise level. If your thermal design needs more airflow than this range provides, the fan will not meet the requirement. Verify that your fan header supports 3 Pin voltage control before installing.

Přednosti

  • Efficient 80 CFM airflow cools cases quickly
  • Quiet 15 to 20 dBA operation suits silent builds
  • Dual ball bearings extend service life
  • 92 mm size fits standard mounting points
  • Thermal sensor adjusts speed to temperature demands

Specifikace

BrandNidec
ModelM35172-57
TypeCase Fan
CompatibilityCase
Fan Size92mm
Bearing Type2 Ball
RPM3500-3999 RPM
Air Flow80 CFM
Noise Level15 - 20 dBA
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesThermal sensor
Dimensions92 x 92 x 32 mm
Přepravní hmotnost0.17 kg
Rozměry balení221 × 112 × 51 mm

Otázky k tomuto produktu

Does the 3-pin connector on the M35172-57 require a motherboard header or a fan controller to power the 92mm fan?

The 3-pin connector plugs directly into a standard motherboard 3-pin fan header or a compatible fan controller to supply power and allow speed monitoring for the 92mm case fan.

Will the 3500-3999 RPM range and 80 CFM airflow of this 92mm fan overwhelm older case ventilation paths designed for slower fans?

The 80 CFM airflow at 3500-3999 RPM moves more air than many legacy 92mm fans; ensure your case vents and dust filters are clean so the higher static pressure does not create turbulence or noise.

How can I confirm the thermal sensor is adjusting the 92mm fan speed between 3500 and 3999 RPM after installation?

Monitor the fan RPM in BIOS or software; the reading should rise toward 3999 RPM as component temperatures climb and fall toward 3500 RPM when the system cools.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.