Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular SO-DIMM module with black chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 204-Pin SO-DIMM CL9 1.5V Laptop RAM

SKU CH-ZDJ4-2A807

4GB DDR3 1333MHz SO-DIMM laptop memory upgrade with CL9 latency and 1.5V operation

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity adds multitasking headroom for everyday workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • 204-pin SO-DIMM form factor fits standard laptop slots
  • CL9 latency and 1.5V voltage follow DDR3 standard specs
  • Non-ECC unbuffered design ensures broad AMD and Intel compatibility

A-Tech 4GB DDR3 1333MHz SO-DIMM for Laptops

This A-Tech module provides 4GB of DDR3 memory at 1333MHz for laptop and all-in-one systems. It uses the standard 204-pin SO-DIMM form factor and operates at 1.5V. The unbuffered, non-ECC design suits mainstream consumer notebooks. It serves as a direct replacement for several Kingston part numbers.

Straightforward Installation

Installation follows the usual SO-DIMM procedure: power off the laptop, open the memory access panel, and seat the module firmly until the retention clips click. The most common issue is a mismatch between the module's DDR3 1333MHz specification and the system's supported memory standard. Verifying the exact requirements prevents a module that will not post.

Confirm Your System Supports DDR3 SO-DIMM

Before ordering, check that your laptop accepts DDR3 SO-DIMM modules running at 1.5V and 1333MHz. Consult the manufacturer's documentation for the maximum supported capacity per slot and total system limit. Ensure the board does not require ECC or registered memory, as this module is neither. Matching these specifications avoids fitment or boot problems.

Přednosti

  • 4GB capacity adds multitasking headroom for everyday workloads
  • DDR3 1333MHz speed matches PC3-10600 system requirements
  • 204-pin SO-DIMM form factor fits standard laptop slots
  • CL9 latency and 1.5V voltage follow DDR3 standard specs
  • Non-ECC unbuffered design ensures broad AMD and Intel compatibility

Specifikace

BrandA-Tech
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Otázky k tomuto produktu

How can I confirm the 4GB DDR3 1333MHz module is detected at 1.5V after installation?

Open Task Manager or BIOS to verify 4GB capacity, 1333MHz speed and 1.5V voltage are reported correctly.

What is included in the package and do I need any extra parts to install this 204-pin SO-DIMM?

The box contains one 4GB DDR3 1333MHz 204-pin SO-DIMM module; no extra cables or tools are required.

Should I choose the single 4GB stick or a kit if my laptop has two DDR3 slots?

This listing is a single 4GB module; buy two if your system supports dual-channel and has two free slots.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.