Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, gold 240-pin edge connector, single DDR3 DIMM module

A-Tech

A-Tech 4GB DDR3 1600MHz PC3-12800 CL11 1.5V 240-Pin Desktop RAM

SKU CH-9J4A-E63FD

A 4GB DDR3 1600MHz CL11 1.5V 240-pin desktop memory module compatible with Dell part numbers A5649222, A5764362, A6994459, A7398800, A7545689 and SNP531R8C/4G

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1600MHz PC3-12800 speed accelerates application loading and file transfers
  • CL11 CAS latency at 1.5V standard voltage ensures stable system operation
  • 240-pin unbuffered non-ECC DIMM fits standard desktop motherboard slots
  • Tested with major-brand chips and validated as a direct replacement for Dell part numbers 5649222 5764362 6994459 7398800 7545689 531

4GB DDR3 1600MHz Desktop Upgrade

This single 4GB DDR3 module runs at 1600MHz with PC3-12800 bandwidth and CL11 latency. It is built as a non-ECC unbuffered DIMM using major-brand chips and operates at the standard 1.5V for desktop systems. The module targets users upgrading older AMD or Intel platforms that accept DDR3 memory.

Check DDR3 slot and voltage before ordering

Verify that your motherboard has an available 240-pin DDR3 slot and supports 1.5V unbuffered non-ECC modules at 1600MHz. Consult the system manual or vendor specifications to confirm the maximum capacity per slot and the total memory limit for your platform. Matching the existing module speed and voltage avoids instability.

240-pin DIMM with major-brand chips

The 240-pin gold-edge connector seats firmly in standard desktop DDR3 sockets and the low-profile green PCB fits most chassis without clearance issues. Major-brand chips are tested for reliability under continuous workloads. The module carries a lifetime warranty and includes access to US-based technical support for installation questions.

Přednosti

  • 4GB capacity expands multitasking headroom for everyday desktop workloads
  • DDR3 1600MHz PC3-12800 speed accelerates application loading and file transfers
  • CL11 CAS latency at 1.5V standard voltage ensures stable system operation
  • 240-pin unbuffered non-ECC DIMM fits standard desktop motherboard slots
  • Tested with major-brand chips and validated as a direct replacement for Dell part numbers 5649222 5764362 6994459 7398800 7545689 531

Specifikace

BrandA-Tech
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Otázky k tomuto produktu

Will this module fit a Dell desktop that originally used part A5649222?

Yes, the module is listed as a compatible replacement for Dell part numbers A5649222, A5764362, A6994459, A7398800, A7545689 and SNP531R8C/4G.

My motherboard has 240-pin DDR3 slots — is the voltage correct?

The module runs at the standard DDR3 voltage of 1.5 V, matching the 1.50 V specification for 240-pin DIMM slots.

Can I add this stick alongside existing CL11 memory without timing conflicts?

The module uses CL11 latency at 1600 MHz, so it will match other PC3-12800 CL11 sticks; the system will run all modules at the slowest common settings.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.