A-Tech
A-Tech 8GB DDR3 1333MHz PC3-10600 240-Pin DIMM 1.5V Non-ECC UDIMM Desktop Memory
8GB DDR3 1333MHz desktop DIMM with 240 pins and 1.5V standard voltage for AMD and Intel systems
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- Tested Frequency1333
- Voltage1.50V
- ECCNo
- Buffered/RegisteredUnbuffered
- Boosts multitasking with 8GB DDR3 capacity
- Runs at 1333MHz PC3-10600 for responsive performance
- Standard 1.5V DDR3 voltage ensures broad compatibility
- 240-pin DIMM fits typical desktop motherboards
- Tested non-ECC unbuffered module delivers reliable operation
8GB DDR3 1333MHz Desktop DIMM
This single 8GB DDR3 module runs at 1333MHz with a PC3-10600 rating. It uses the standard 240-pin DIMM form factor and operates at 1.5V. The unbuffered, non-ECC design fits typical desktop memory slots.
Suits owners of compatible desktops needing an 8GB
This module replaces specific Hynix DDR3 parts in systems that accept unbuffered non-ECC memory at this speed. Builders requiring ECC error correction, registered modules, or a different DDR generation should look elsewhere.
8GB capacity on a single 240-pin module
The 8GB density in one stick lets you add memory without occupying multiple slots. Verify your motherboard supports this capacity per slot and the DDR3 1333MHz specification before ordering.
Přednosti
- Boosts multitasking with 8GB DDR3 capacity
- Runs at 1333MHz PC3-10600 for responsive performance
- Standard 1.5V DDR3 voltage ensures broad compatibility
- 240-pin DIMM fits typical desktop motherboards
- Tested non-ECC unbuffered module delivers reliable operation
Specifikace
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| Tested Frequency | 1333 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Otázky k tomuto produktu
Will this 8 GB module work in a desktop that currently uses Hynix HMT41GU6AFR8C-H9 sticks?
Yes, it is listed as a direct replacement for HMT41GU6AFR8C-H9, HMT41GU6BFR8C-H9, HMT41GU6DFR8C-H9 and HMT41GU6MFR8C-H9.
Does the motherboard need to support 1.5 V DDR3 at 1333 MHz?
The module runs at the standard 1.5 V and is rated for 1333 MHz (PC3-10600); your board must accept that voltage and speed.
Is the stick unbuffered and non-ECC so it fits a regular consumer desktop?
It is an unbuffered, non-ECC UDIMM with 240 pins, the form factor used by typical consumer desktops.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



