Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small rectangular SFP+ transceiver module with LC connector and metallic finish

AddOn

AddOn J9150D-AO 10GBase-SR SFP+ Transceiver 850nm 300m LC DOM

SKU CH-KN64-XN6AY MPN J9150D-AO

10GBase-SR SFP+ transceiver delivers 10 Gigabit Ethernet over multi-mode fiber up to 300 metres at 850nm via LC connector with digital optical monitoring and hot-swap convenience

  • Compatible BrandHP®
  • Device TypeTransceiver
  • Form FactorSFP+
  • Wavelength850nm
  • ProtocolsTCP/IP
  • ConnectorsLC

Type 10GBase-SR: 300m

  • 10 GbE performance up to 300 m over MMF
  • 850 nm wavelength with LC duplex connector
  • Hot-swappable SFP+ installs without downtime
  • Digital optical monitoring gives real-time diagnostics
  • TAA compliant and 100 % HP J9150D compatible

HP® J9150D Compatible 10GBase-SR Transceiver

This AddOn SFP+ transceiver delivers 10 Gigabit Ethernet connectivity over multi-mode fibre. It is designed for network administrators upgrading or repairing HP® equipment that requires the J9150D part number. The module supports Digital Optical Monitoring for real-time parameter visibility.

300 Metre Reach Over 850nm Multi-Mode Fibre

The single specification that determines compatibility is the 300 metre maximum distance over OM3 multi-mode fibre at 850nm wavelength. This SR-class optic will not reach longer campus links or single-mode runs; buyers needing extended reach must select a different transceiver type.

Hot-Swappable LC Module With TAA Compliance

Installation is tool-free: insert the LC connector into a compatible SFP+ cage while the system is running. The most common issue is a polarity mismatch on the duplex LC patch cord, which prevents link establishment until the transmit and receive fibres are crossed correctly.

Přednosti

  • 10 GbE performance up to 300 m over MMF
  • 850 nm wavelength with LC duplex connector
  • Hot-swappable SFP+ installs without downtime
  • Digital optical monitoring gives real-time diagnostics
  • TAA compliant and 100 % HP J9150D compatible

Specifikace

BrandAddOn
Part NumberJ9150D-AO
Compatible BrandHP®
Device TypeTransceiver
Form FactorSFP+
Wavelength850nm
ProtocolsTCP/IP
ConnectorsLC
Max Distance300m
Transfer Rate10-Gigabit
FeatureCompatible OEM: HP®
Compatible With OEM Part Number(s) J9150D
Transceiver Type: SR
Reach: 300m
Connector: LC
Form Type: SFP+
Wavelength: 850nm
Media: MMF
Speed Description: 10-Gigabit
Environment: 0 to 70C
Speed: 10GBase
DOM
Přepravní hmotnost33.72 kg
Rozměry balení279 × 254 × 127 mm

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does the 10 Gigabit speed mean when this transceiver is installed in a switch?

It delivers 10 Gigabit Ethernet throughput over multi-mode fibre up to 300 metres using an 850nm wavelength and LC connectors.

What does the SFP+ form factor and LC connector limit in practice?

The SFP+ form factor fits any standard SFP+ port, while the LC duplex connector mates with multi-mode fibre patch cords for 300 metre reach at 850nm.

What temperature range and physical slot does this module require to operate?

It operates from 0 to 70 °C and installs in any standard SFP+ cage with a bail-clasp latch.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.