Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
AGI AI818-43 1TB M.2 2280 internal SSD with graphite heat sink sticker

AGI

AGI AI818-43 1TB M.2 2280 NVMe internal SSD

SKU CH-279C-K5RPG

1TB PCIe 4.0 x4 NVMe drive with graphite heatsink delivers up to 4700 MBps read and 2800 MBps write for demanding workloads

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfacePCI-Express 4.0 x4

Options AI818-43-1TB

  • Ultra-fast PCIe Gen4 x4 reads up to 4700 MBps
  • Sustained writes up to 2800 MBps for large files
  • 1TB capacity stores games and projects
  • Slim graphite heat sink keeps temperatures steady
  • 600 TBW and 1,600,000-hour MTBF for longevity

AGI AI818-43 1TB NVMe SSD

The AGI AI818-43 is a 1TB internal solid state drive built for consumer workloads. It uses an M.2 2280 form factor and a PCI-Express 4.0 x4 interface with NVMe protocol. 3D NAND flash provides the storage medium. A graphite heat sink sticker is included for thermal management.

Sustained load behaviour

Sequential reads reach up to 4700 MBps and writes up to 2800 MBps under peak conditions. The drive is rated for 600TB written and a 1,600,000 hour MTBF. Operating temperature spans 0°C to 70°C, so the heat sink helps maintain performance during extended heavy I/O.

Compatibility check

Verify your motherboard has an M.2 slot keyed for PCIe 4.0 x4 NVMe drives. Confirm the slot accepts 2280 length modules and has clearance for the graphite heat sink sticker. Ensure the system BIOS supports NVMe boot if this will be the primary drive.

Přednosti

  • Ultra-fast PCIe Gen4 x4 reads up to 4700 MBps
  • Sustained writes up to 2800 MBps for large files
  • 1TB capacity stores games and projects
  • Slim graphite heat sink keeps temperatures steady
  • 600 TBW and 1,600,000-hour MTBF for longevity

Specifikace

BrandAGI
SeriesAI818-43
ModelAGI1T0G43AI818
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCI-Express 4.0 x4
Max Sequential ReadUp to 4700 MBps
Max Sequential WriteUp to 2800 MBps
Terabytes Written (TBW)600TB
MTBF1,600,000 hours
HeatSinkwith HeatSink
FeaturesCapacity: 512GB / 1TB / 2TB
NAND Flash: 3D NAND
Interface: PCIe Gen 4 x 4
Certifications: CE, FCC, BSMI, RoHS
Warranty: 5 years
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Operating Humidity5% to~98%RH (Non-condensing)
Max Shock Resistance1500G
Max Vibration Resistance15G
Height5.30mm
Width22.00mm
Depth80.00mm
Weight7.5g

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How warm does the AI818-43 with its graphite heat sink get under sustained all-day workloads?

The drive is rated for continuous operation up to 70 °C and the slim graphite heat sink is designed to keep temperatures in check during long sessions.

What motherboard slot and protocol does the AGI AI818-43 1TB require to function?

It needs an M.2 2280 key-M slot wired for PCIe 4.0 x4 with NVMe support.

Will the AI818-43 1TB run at full speed in a PCIe 3.0 M.2 slot?

It will operate but is limited to PCIe 3.0 bandwidth, so sequential reads drop below the 4700 MBps ceiling.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.