Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Coiled UV-green PVC tubing, 16 mm OD, 10 mm ID, three-metre length

Alphacool

Alphacool AlphaTube HF 10mm ID 16mm OD 3m UV Green PVC

SKU CH-DX5Z-9HTB5

Flexible PVC tubing with 10 mm inner and 16 mm outer diameter, UV Green colour, three metres long, rated from -10 °C to 80 °C

  • TypeTubing

Color Green

  • Flexible PVC tubing installs easily in tight loops
  • UV Green colour glows under UV lighting for visual impact
  • 10 mm inner diameter and 16 mm outer diameter fit standard 3/8" ID fittings
  • 3 metre length provides ample reach for full custom loops
  • Rated for -10 to 80 °C operating temperature range

UV Green PVC Tubing for Custom Loops

This Alphacool AlphaTube HF tubing is made for builders assembling a custom water-cooling loop. The 10 mm inner diameter and 16 mm outer diameter match common compression fittings, while the three metre length gives enough material for most single-loop builds. UV Green pigment reacts under black light for a distinctive visual effect. It suits enthusiasts who want coloured coolant paths without using dyed fluid.

Thermal Range and Pressure Limits

The PVC construction is rated for a working temperature span of minus 10 to 80 degrees Celsius, covering typical loop operating conditions. Working pressure is specified at 3 bar with a burst pressure of 18 bar, providing a wide safety margin for standard pump pressures. Hardness measures 65 to 70 A-Shore, so the tube resists kinking during routing while remaining pliable enough for tight bends. No active cooling or noise is involved because the product is passive tubing.

Build Quality and Daily Handling

A Shore hardness of 65 to 70 A means the tubing holds its shape once bent, reducing the risk of flow restriction at sharp corners. The 16 mm outer diameter fits standard 16/10 mm compression fittings, so no adapters are required for common water-block and radiator ports. PVC material resists plasticiser leaching better than softer grades, helping maintain clarity and flexibility over time. Buyers who need smaller bend radii than the material allows or who prefer hard-line aesthetics will need a different solution.

Přednosti

  • Flexible PVC tubing installs easily in tight loops
  • UV Green colour glows under UV lighting for visual impact
  • 10 mm inner diameter and 16 mm outer diameter fit standard 3/8" ID fittings
  • 3 metre length provides ample reach for full custom loops
  • Rated for -10 to 80 °C operating temperature range

Specifikace

TypeTubing

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install the 10 mm ID AlphaTube HF onto 16 mm OD fittings without kinking?

Slide the tubing over the barbed fitting while warm; the 65-70 A-Shore PVC is flexible enough for tight bends yet rigid enough to resist kinking if you avoid forcing radii tighter than the tubing naturally allows.

When should I replace this UV Green PVC tubing in a loop?

Plan replacement when the tubing clouds, stiffens, or loses UV reactivity — typically after one to two years of continuous operation within the -10 °C to 80 °C working range.

What pressure limit will the tubing hit first under sustained pump pressure?

The rated working pressure is 3 bar; sustained operation above that approaches the 18 bar burst rating, so keep loop pressure at or below 3 bar.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.