Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Vertical metal power strip with 42 IEC outlets and thick input cable

APC

APC AP8868 Metered 3-Phase PDU 208V 35A 36×C13 6×C19 0U

SKU CH-3QXJ-J11Z7 MPN AP8868

A metered three-phase PDU delivering 10.0 kW at 208 V with thirty-six C13 and six C19 outlets in a 0U vertical form factor

  • TypeMetered
  • Rack Size0U
  • CertificationscUL Listed,EN 55022 Class A,EN 55024,EN 61000-3-2,EN 61000-3
  • ROHSYes
  • Input Voltage208V 3PH
  • Input Frequency50/60 Hz
  • Real-time power metering enables energy optimisation and load balancing
  • 42 IEC locking outlets (36 C13, 6 C19) support dense rack deployments
  • 0 kW three-phase capacity at 208 V handles high-density IT loads
  • 0U vertical mounting preserves valuable rack space for equipment
  • User-defined alarms with Web, SNMP and Telnet access prevent overloads

Three-phase metered PDU for 208 V racks

This APC AP8868 is a 0U vertical power distribution unit built for 208 V three-phase supply at 35 A. It delivers 10.0 kW through forty-two locking IEC outlets: thirty-six C13 and six C19. Active metering provides real-time load data and user-defined alarm thresholds for local or remote alerts via Web, SNMP or Telnet.

Verify three-phase 208 V supply and CS8365 inlet

Confirm your facility provides 208 V three-phase power at 50/60 Hz with a CS8365 connector rated for 35 A. The 6 ft input cord must reach the source without extension. Ensure rack space accommodates a 0U vertical mount and that operating limits of 0–55 °C and 5–95 % humidity are met.

Locking outlets and sensor port aid density

Locking C13 and C19 receptacles prevent accidental disconnection in dense cabinets. A temperature/humidity sensor port enables environmental monitoring. Bundled mounting brackets, serial configuration cable and installation guide support immediate deployment. Centralised management platforms integrate metering data for capacity planning.

Přednosti

  • Real-time power metering enables energy optimisation and load balancing
  • 42 IEC locking outlets (36 C13, 6 C19) support dense rack deployments
  • 0 kW three-phase capacity at 208 V handles high-density IT loads
  • 0U vertical mounting preserves valuable rack space for equipment
  • User-defined alarms with Web, SNMP and Telnet access prevent overloads

Specifikace

BrandAPC
ModelAP8868
TypeMetered
Rack Size0U
CertificationscUL Listed,EN 55022 Class A,EN 55024,EN 61000-3-2,EN 61000-3-3,FCC Part 15 Class A,ICES-003,UL Listed,VCCI Class A
ROHSYes
Input Voltage208V 3PH
Input Frequency50/60 Hz
Maximum Input Current35A
Input Connector(s)CS8365
Cord Length6 ft
Output Voltage208V
Output Watts (VA)10.0kW
Output Connector(s)(36) IEC 320 C13
(6) IEC 320 C19
Overload ProtectionYes
Operating Environment0 - 55 degree C
Operating Relative Humidity5 - 95%
Operating Elevation0 - 3000 m
Storage Temperature-25 - 65 ºC
Storage Relative Humidity5 - 95%
Storage Elevation0 - 15000 m
FeaturesAPC Rack PDU 2G, Metered, ZeroU, 10.0kW, 208V, (36) C13 & (6) C19 - 36 x IEC 60320 C13, 6 x IEC 60320 C19 - 10 kVARack-mountable
Dimensions72.01" x 2.2" x 2.01"
Weight18.78 lbs.
Přepravní hmotnost11.79 kg
Rozměry balení2051 × 170 × 112 mm

Otázky k tomuto produktu

What does the box include and what must be purchased separately?

The package contains the metered rack PDU, installation guide, rack mounting brackets, safety guide and serial configuration cable. Input cord uses a CS8365 plug, so a matching 208 V three-phase source is required.

Which outlet mix should I choose for my rack?

This unit provides thirty-six IEC 320 C13 outlets and six IEC 320 C19 outlets in a single 0U vertical form factor; no alternative mixes exist for this model.

What does the 10.0 kW rating mean when the PDU is installed?

It is the maximum continuous output at 208 V three-phase with a 35 A input limit, giving roughly 10.0 kW of usable power for connected servers and networking gear.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.